14G (6.30mm) Stainless A2-70 G304 Pan Phillips (PH3) Self Tapping Screws ANSI B18.6.4
Pan Phillips Self Tapper Screws create (taps) it's own thread as the screw is being driven in. Pan heads feature a flat dome style rounded head and a flat underside designed to provide maximum holding power on flat surfaces. Suitable for: Can you be used in stainless light gauge steel aluminium certain plastics and timber. To ensure the best result it is recommended to always drill a pilot hole Material / Coating: Stainless Steel A2-70 G304 is the most popular grade of stainless steel. It is aesthetically pleasing to the eye and very practical because of its excellent corrosion protection in most environments. It is highly recommended to use Stainless Steel A4-70 G316 if the product will be used within 300 metres of the coast in the food and chemical industry or within salt spray affected areas. Most products can be identified by the following markings: A2 A2-70 304 or G304. Stainless steels are largely non-magnetic but it is common for stainless steel fasteners to show a small degree of magnetism which is a result of work-hardening during the manufacturing process Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and corrosion can occur if the material is installed or handled incorrectly. The use of tools and drills made from conventional steel during the installation of stainless steel fasteners may also lead to problems. Even the hardest of tools can produce debris that leaves minute steel particles on the stainless steel fastener surfaces or in pre-drilled holes. It is these particles that often rust when exposed to moisture or oxygen and can result in a stained or tarnished finish to the stainless steel material Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.
Pan Phillips Self Tapper Screws create (taps) it's own thread as the screw is being driven in. Pan heads feature a flat dome style rounded head and a flat underside designed to provide maximum holding power on flat surfaces. Suitable for: Can you be used in stainless light gauge steel aluminium certain plastics and timber. To ensure the best result it is recommended to always drill a pilot hole Material / Coating: Stainless Steel A2-70 G304 is the most popular grade of stainless steel. It is aesthetically pleasing to the eye and very practical because of its excellent corrosion protection in most environments. It is highly recommended to use Stainless Steel A4-70 G316 if the product will be used within 300 metres of the coast in the food and chemical industry or within salt spray affected areas. Most products can be identified by the following markings: A2 A2-70 304 or G304. Stainless steels are largely non-magnetic but it is common for stainless steel fasteners to show a small degree of magnetism which is a result of work-hardening during the manufacturing process Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and corrosion can occur if the material is installed or handled incorrectly. The use of tools and drills made from conventional steel during the installation of stainless steel fasteners may also lead to problems. Even the hardest of tools can produce debris that leaves minute steel particles on the stainless steel fastener surfaces or in pre-drilled holes. It is these particles that often rust when exposed to moisture or oxygen and can result in a stained or tarnished finish to the stainless steel material Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.
Last updated at 10/05/2026 11:37:55
14g (6.30mm) x 1/2" Pan Phillips (PH3) Self Tapping Screw A2-70 Stainless G304 ANSI B18.6.4
Free delivery between Tue – Thu
14g (6.30mm) Stainless A2-70 G304 Pan Phillips (PH3) Self Tapping Screws ANSI B18.6.4
Free delivery between Tue – Thu
Pack Size 2 Stainless G304 Pan Head 14g (6.1mm) X 1/2" Self Tapping
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
14g-14 X 1/2" Pan Phillips Ph3 Self Tapper Screw A2 Stainless G304
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Hobsons - #14 x 1/2 304 Stainless Ansi B18.6.3 / A2 Self-Tapper Pan Phil | T04P14050 (Pack Of 100)
Delivery between 11–19 May $7.95
originally posted on ebay.com
As anticipated it should be.
originally posted on ebay.com
Value for money.
originally posted on ebay.com
good price good quality
| Alternative Brands | Brighton Best | Inox World |
| Brand | Hobson Engineering |
| Class Grade | A2-70 G304 |
| Custom Label 0 | Screws|Self Tappers|Pan Head |
| Drive Type | Phillips |
14g (6.30mm) x 1/2" Pan Phillips (PH3) Self Tapping Screw A2-70 Stainless G304 ANSI B18.6.4
Free delivery between Tue – Thu
14g (6.30mm) Stainless A2-70 G304 Pan Phillips (PH3) Self Tapping Screws ANSI B18.6.4
Free delivery between Tue – Thu
Pack Size 2 Stainless G304 Pan Head 14g (6.1mm) X 1/2" Self Tapping
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
14g-14 X 1/2" Pan Phillips Ph3 Self Tapper Screw A2 Stainless G304
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Hobsons - #14 x 1/2 304 Stainless Ansi B18.6.3 / A2 Self-Tapper Pan Phil | T04P14050 (Pack Of 100)
Delivery between 11–19 May $7.95
As anticipated it should be.
Value for money.
good price good quality
Perfect, Exactly what I needed.
Great product
All good
Perfect for the job I'm working on Only thin material being joined
Easy and fast value buy here
Top is very soft, so is it stainless steel? Had to cut screws out of very akward spot.
Perfect and really good value.
| Alternative Brands | Brighton Best | Inox World |
| Brand | Hobson Engineering |
| Class Grade | A2-70 G304 |
| Custom Label 0 | Screws|Self Tappers|Pan Head |
| Drive Type | Phillips |
Pan Phillips Self Tapper Screws create (taps) it's own thread as the screw is being driven in. Pan heads feature a flat dome style rounded head and a flat underside designed to provide maximum holding power on flat surfaces. Suitable for: Can you be used in stainless light gauge steel aluminium certain plastics and timber. To ensure the best result it is recommended to always drill a pilot hole Material / Coating: Stainless Steel A2-70 G304 is the most popular grade of stainless steel. It is aesthetically pleasing to the eye and very practical because of its excellent corrosion protection in most environments. It is highly recommended to use Stainless Steel A4-70 G316 if the product will be used within 300 metres of the coast in the food and chemical industry or within salt spray affected areas. Most products can be identified by the following markings: A2 A2-70 304 or G304. Stainless steels are largely non-magnetic but it is common for stainless steel fasteners to show a small degree of magnetism which is a result of work-hardening during the manufacturing process Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and corrosion can occur if the material is installed or handled incorrectly. The use of tools and drills made from conventional steel during the installation of stainless steel fasteners may also lead to problems. Even the hardest of tools can produce debris that leaves minute steel particles on the stainless steel fastener surfaces or in pre-drilled holes. It is these particles that often rust when exposed to moisture or oxygen and can result in a stained or tarnished finish to the stainless steel material Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.
Pan Phillips Self Tapper Screws create (taps) it's own thread as the screw is being driven in. Pan heads feature a flat dome style rounded head and a flat underside designed to provide maximum holding power on flat surfaces. Suitable for: Can you be used in stainless light gauge steel aluminium certain plastics and timber. To ensure the best result it is recommended to always drill a pilot hole Material / Coating: Stainless Steel A2-70 G304 is the most popular grade of stainless steel. It is aesthetically pleasing to the eye and very practical because of its excellent corrosion protection in most environments. It is highly recommended to use Stainless Steel A4-70 G316 if the product will be used within 300 metres of the coast in the food and chemical industry or within salt spray affected areas. Most products can be identified by the following markings: A2 A2-70 304 or G304. Stainless steels are largely non-magnetic but it is common for stainless steel fasteners to show a small degree of magnetism which is a result of work-hardening during the manufacturing process Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and corrosion can occur if the material is installed or handled incorrectly. The use of tools and drills made from conventional steel during the installation of stainless steel fasteners may also lead to problems. Even the hardest of tools can produce debris that leaves minute steel particles on the stainless steel fastener surfaces or in pre-drilled holes. It is these particles that often rust when exposed to moisture or oxygen and can result in a stained or tarnished finish to the stainless steel material Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person and Bolt and Nut Australia is not responsible for any loss claim or damages arising therefrom.
in 5 offers
The lowest price for 14G (6.30mm) Stainless A2-70 G304 Pan Phillips (PH3) Self Tapping Screws ANSI B18.6.4 right now is $5.00 at Bolt & Nut Australia, compared across 3 retailers.
The all-time low was $3.00 on 7 Aug 2025 — today's price is 67% above the lowest ever. It has been notably cheaper before — worth setting a price alert.
Prices last updated 10 May 2026.
