Arctic P12, Pressure Optimized 120mm Fan
Features : Optimised for Static Pressure Lower power consumption High Quality Bearing Ideal choice on heatsinks, radiators and (partly-) covered case vents Push- or pull-configuration possible Optimised for Static Pressure During the development of the new P12, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 is particularly suitable for use on heatsinks and radiators. High Quality Bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
Features : Optimised for Static Pressure Lower power consumption High Quality Bearing Ideal choice on heatsinks, radiators and (partly-) covered case vents Push- or pull-configuration possible Optimised for Static Pressure During the development of the new P12, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 is particularly suitable for use on heatsinks and radiators. High Quality Bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
Features : Optimised for Static Pressure Lower power consumption High Quality Bearing Ideal choice on heatsinks, radiators and (partly-) covered case vents Push- or pull-configuration possible Optimised for Static Pressure During the development of the new P12, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 is particularly suitable for use on heatsinks and radiators. High Quality Bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
Features : Optimised for Static Pressure Lower power consumption High Quality Bearing Ideal choice on heatsinks, radiators and (partly-) covered case vents Push- or pull-configuration possible Optimised for Static Pressure During the development of the new P12, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 is particularly suitable for use on heatsinks and radiators. High Quality Bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
in 3 offers
The lowest price for Arctic P12, Pressure Optimized 120mm Fan right now is $17.00 at desertcart.com.au, compared across 2 retailers.
The all-time low was $11.39 on 6 June 2026 — today's price is 49% above the lowest ever. It has been notably cheaper before — worth setting a price alert.
Prices last updated 27 July 2026.
Last updated at 27/07/2026 04:42:37
P12 - PC Fan, 120 mm Fan, PC Case Fan, Pressure-optimised
Delivery between 2–5 Aug $29
ARCTIC P12 Silent - Pressure-optimised Extra Quiet 120 mm Fan
Delivery between 2–5 Aug $29
Arctic P12, Pressure Optimized 120mm Fan
Delivery $68.66
originally posted on arctic.de
I'm not an electronics engineer and just replaced a noisy fan in a freezer with this one. The Arctic fan makes a solid impression and runs very quietly.
originally posted on microcenter.com
It is a breath of fresh air to find a fan that isn't $30+, with RGB functionality that I don't care for and that doesn't even perform that well. Fantastic price to performance ratio, would buy again in a heartbeat.To go into more detail, did a quick A/B test with the stock Corsair fan that came with the H60 that I'm using on my GPU with an NZXT Kraken G12. You can feel a much better spread of air passing through the radiator, it has a better airflow to noise ratio, a better overall noise profile and it looks pretty nice too. Doesn't have a stupid color scheme or an array of RGB that some company wants me to shell out another $40+ just to be able to control (absolutely ridiculous). Did I mention it's priced well?
originally posted on microcenter.com
This product works. It is not terribly loud and the amount of air that it moves is good. I would recommend for a non-PWM fan, but I would recommend PWM fans for most use-cases as they are easier to tune.
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Fan Size | 120 mm |
| Fan Thickness | 25mm |
| Bearing Type | Fluid Dynamic |
P12 - PC Fan, 120 mm Fan, PC Case Fan, Pressure-optimised
Delivery between 2–5 Aug $29
ARCTIC P12 Silent - Pressure-optimised Extra Quiet 120 mm Fan
Delivery between 2–5 Aug $29
Arctic P12, Pressure Optimized 120mm Fan
Delivery $68.66
I'm not an electronics engineer and just replaced a noisy fan in a freezer with this one. The Arctic fan makes a solid impression and runs very quietly.
It is a breath of fresh air to find a fan that isn't $30+, with RGB functionality that I don't care for and that doesn't even perform that well. Fantastic price to performance ratio, would buy again in a heartbeat.To go into more detail, did a quick A/B test with the stock Corsair fan that came with the H60 that I'm using on my GPU with an NZXT Kraken G12. You can feel a much better spread of air passing through the radiator, it has a better airflow to noise ratio, a better overall noise profile and it looks pretty nice too. Doesn't have a stupid color scheme or an array of RGB that some company wants me to shell out another $40+ just to be able to control (absolutely ridiculous). Did I mention it's priced well?
This product works. It is not terribly loud and the amount of air that it moves is good. I would recommend for a non-PWM fan, but I would recommend PWM fans for most use-cases as they are easier to tune.
I like most of Arctic Cooling's fans, and find them to be quiet and reliable, and cheap given that a lot of them don't have LED's, and also especially considering that they tend to have hydro-dynamic bearing fans instead of cheap sleeve-bearing ones you can't mount horizontally (like on the top of your case).This one's perfect for a front intake fan (especially on cases where the hard drive cage is near the front intake fan mount) as it's a high static pressure fan that can force air in. It's also good for cooling CPU's and GPU's (if you have to zip-tie a case fan or two to your GPU's heatsink if the original fan goes out for instance) as well.Although if you want to cool your GPU, Arctic actually makes aftermarket "Accelero" coolers for that, if you don't want ... MoreI like most of Arctic Cooling's fans, and find them to be quiet and reliable, and cheap given that a lot of them don't have LED's, and also especially considering that they tend to have hydro-dynamic bearing fans instead of cheap sleeve-bearing ones you can't mount horizontally (like on the top of your case).This one's perfect for a front intake fan (especially on cases where the hard drive cage is near the front intake fan mount) as it's a high static pressure fan that can force air in. It's also good for cooling CPU's and GPU's (if you have to zip-tie a case fan or two to your GPU's heatsink if the original fan goes out for instance) as well.Although if you want to cool your GPU, Arctic actually makes aftermarket "Accelero" coolers for that, if you don't want to take the risk of jury-rigging a cooling solution.This fan can be slightly noisy at full speed despite its low RPM, but if you can set your BIOS to control the fan speed (like with Gigabyte's Smart Fan settings) it can be actually almost silent most of the time.If it were more quiet at high RPM's or pushed through just a little bit more air, I'd rate this a 5/5 instead of a 4, but honestly, at this price, I really can't complain. If you want a good 120mm case fan with high static pressure, and you don't want to spend a lot or have bright LED's, this is a fan I really recommend.
When I purchased my Corsair Carbide 275R white case, it only game with a single front fan and a rear fan. I did not want RGB fans in the case as the motherboard does not support RGB headers, so I needed some good 120mm fans to fill the remaining mounts. This fan does not disappoint for the cost. There were only two of these at the time I purchased them, having to buy two of the white fan versions of this for the top of my case, but they work well with my build. They are not very loud though they are audible if you are right in front of the case. They are good fans for the price.
Cheap price for good cooling. Has not caused me any issues and I have used it for a year and a half. Would recommend this product
I have been using these specific Arctic Cooling fans for all of my builds. Current build with RTX 3080 Ti and 240 AIO on a 5800X has all P12 fans. Yes, even as my exhaust fans. Trust me, they perform well beyond the price point. Even as a 3 pin fan they are worth every penny because they perform better than all other brands aside from Noctua which are very expensive. I buy these in bulk because of the 5 pack and amazing value.
I picked this fan up for my GFs build that I put in a Home Theater box. Fan is quiet and efficient, I feel strong airflow when I hold my hand up to it and the fan blades cut air quietly. The bearing they use must be great because I can not hear it.
This Case Fan will give all the performance you will need to intake and exhaust out of your case. I have it set up for 3 front intakes, 2 top exhaust, and 1 rear exhaust. Performs really nicely and is a nice fit for anyone's needs.
Needed to add a fan to cool a HD bay in a case that was being rebuilt to be put away/out of the way to still run. Didn't need RGB lighting on it and pushes enough air where it's needed. Runs nice and silent with enough airflow to keep the HD bay cool. Just note the fanblade edges are a bit pointy/sharp compared to other brands that are smoother when they are molded, but other than that no issue using this fan again if needed.
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Fan Size | 120 mm |
| Fan Thickness | 25mm |
| Bearing Type | Fluid Dynamic |