Fractal Design Torrent E-ATX Tempered Glass Light Tint Computer Case - Grey
FD-C-TOR1A-02 Open Grille and 180mm Front Fans Maximum Air Intake with No Compromise Performance Are you looking for the ultimate in top-tier airflow performance? The FD-C-TOR1A-02 is the perfect solution. Ideal for gamers and performance enthusiasts, this open grille designed chassis comes with three 140mm and two 180mm PWM fans balanced to provide outstanding heating and cooling without sacrificing noise levels. Features include five PWM fans for balancing performance, cooling and noise, plus a newly developed 180x38mm Dynamic X2 PWM fan leveraging power, size and thickness for massive air-moving capacity. The FD-C-TOR1A-02 also includes optional front and bottom nylon filters to help you prioritize between dust filtering or even higher airflow. Other features include a streamlined open interior for breathing room for components, GPU support bracket to help your GPU stay level, plus removable top bezel and cable guides with cable straps for easy installation and cable management. This case is also ready for water-cooling, with integrated reservoir and seven bridgeless expansion slots allowing for extensive customization. For the ultimate in air intake with no compromise, the FD-C-TOR1A-02 is the perfect choice.
FD-C-TOR1A-02 Open Grille and 180mm Front Fans Maximum Air Intake with No Compromise Performance Are you looking for the ultimate in top-tier airflow performance? The FD-C-TOR1A-02 is the perfect solution. Ideal for gamers and performance enthusiasts, this open grille designed chassis comes with three 140mm and two 180mm PWM fans balanced to provide outstanding heating and cooling without sacrificing noise levels. Features include five PWM fans for balancing performance, cooling and noise, plus a newly developed 180x38mm Dynamic X2 PWM fan leveraging power, size and thickness for massive air-moving capacity. The FD-C-TOR1A-02 also includes optional front and bottom nylon filters to help you prioritize between dust filtering or even higher airflow. Other features include a streamlined open interior for breathing room for components, GPU support bracket to help your GPU stay level, plus removable top bezel and cable guides with cable straps for easy installation and cable management. This case is also ready for water-cooling, with integrated reservoir and seven bridgeless expansion slots allowing for extensive customization. For the ultimate in air intake with no compromise, the FD-C-TOR1A-02 is the perfect choice.
FD-C-TOR1A-02 Open Grille and 180mm Front Fans Maximum Air Intake with No Compromise Performance Are you looking for the ultimate in top-tier airflow performance? The FD-C-TOR1A-02 is the perfect solution. Ideal for gamers and performance enthusiasts, this open grille designed chassis comes with three 140mm and two 180mm PWM fans balanced to provide outstanding heating and cooling without sacrificing noise levels. Features include five PWM fans for balancing performance, cooling and noise, plus a newly developed 180x38mm Dynamic X2 PWM fan leveraging power, size and thickness for massive air-moving capacity. The FD-C-TOR1A-02 also includes optional front and bottom nylon filters to help you prioritize between dust filtering or even higher airflow. Other features include a streamlined open interior for breathing room for components, GPU support bracket to help your GPU stay level, plus removable top bezel and cable guides with cable straps for easy installation and cable management. This case is also ready for water-cooling, with integrated reservoir and seven bridgeless expansion slots allowing for extensive customization. For the ultimate in air intake with no compromise, the FD-C-TOR1A-02 is the perfect choice.
FD-C-TOR1A-02 Open Grille and 180mm Front Fans Maximum Air Intake with No Compromise Performance Are you looking for the ultimate in top-tier airflow performance? The FD-C-TOR1A-02 is the perfect solution. Ideal for gamers and performance enthusiasts, this open grille designed chassis comes with three 140mm and two 180mm PWM fans balanced to provide outstanding heating and cooling without sacrificing noise levels. Features include five PWM fans for balancing performance, cooling and noise, plus a newly developed 180x38mm Dynamic X2 PWM fan leveraging power, size and thickness for massive air-moving capacity. The FD-C-TOR1A-02 also includes optional front and bottom nylon filters to help you prioritize between dust filtering or even higher airflow. Other features include a streamlined open interior for breathing room for components, GPU support bracket to help your GPU stay level, plus removable top bezel and cable guides with cable straps for easy installation and cable management. This case is also ready for water-cooling, with integrated reservoir and seven bridgeless expansion slots allowing for extensive customization. For the ultimate in air intake with no compromise, the FD-C-TOR1A-02 is the perfect choice.
in 2 offers
The lowest price for Fractal Design Torrent E-ATX Tempered Glass Light Tint Computer Case - Grey right now is $299.00 at PC Case Gear, compared across 2 retailers.
The all-time low was $299.00 on 30 July 2025. That's the lowest price we've ever tracked — a great time to buy.
Prices last updated 19 July 2026.
Last updated at 19/07/2026 19:29:00
Fractal Design Torrent Tempered Glass Light Tint Case Gray
Delivery between Tue – Thu $37
Fractal Design Torrent Compact Windowed ATX Mid Tower Case, Steel / Light Tint Tempered Glass, 7 Expansion Slots, Up to 360mm Radiator Support, 3x 120
Delivery between 22–29 July $303.24
originally posted on scan.co.uk
This is a fantastic case. No regrets, still prefer to any other for me. The look and style is great and coherent, some RGB fans in the front really create a great effect with that grill in the front. The grey is superbly subtly more interesting that black for me personally (and white is not my thing.) [NB: RGB fans *not* included]Some odd short comings though. I could only just fit my 420mm iCUE H170's rad in the front by putting things together in the right order (and sliding in and up ar and angle from the front) 'before' putting the front mount fan rails in after. Unless you want a really hard life (and to risk not be able to pull it off at all) you will want to opt for a 360 rad at most in the front, I got lucky frankly, it worked but only just.. Also ... MoreThis is a fantastic case. No regrets, still prefer to any other for me. The look and style is great and coherent, some RGB fans in the front really create a great effect with that grill in the front. The grey is superbly subtly more interesting that black for me personally (and white is not my thing.) [NB: RGB fans *not* included]Some odd short comings though. I could only just fit my 420mm iCUE H170's rad in the front by putting things together in the right order (and sliding in and up ar and angle from the front) 'before' putting the front mount fan rails in after. Unless you want a really hard life (and to risk not be able to pull it off at all) you will want to opt for a 360 rad at most in the front, I got lucky frankly, it worked but only just.. Also shenanigans were then required to mount fans in the front for RGB aesthetics as well as a rad. I had to mount the rad to the left rail, and fasten that (leaving it floating on the right) and mount my fans to the right rail only and then mount that leaving the fans floating on the left. I'm guessing that would be bad for static pressure, so I used some door draft excludes to help seal that left side, and used the supplied 140's on the back of the rad in a push-pull fan-sandwich configuration (not a problem for sound as the fans run slow and silent unless I'm working so hard my GPU drowns out the as higher loads). I can think of a couple of ways they could have fixed this.My last case was also fractal (which I loved, 12 years old) but this case has the same problem that did. Very little space bind the backplate for cables. You're going to have to make the effort to just to be able to close the rear panel. An extra 3mm would have made a world of difference. I doubt anyone would have said no if it had been 3mm wider, and 8mm taller (to help fit a rad).
originally posted on digitec.ch
Fantastic case that keeps my equipment cool. Probably one of the (if not the) best case on the market at the moment. Absolutely loved building in it and using it.
originally posted on scan.co.uk
Excellent case with great cable management and cooling. A breeze to build and looks great.
| General | |
| Form Factor | Tower |
| Windowed Side Panel Material | Tempered glass |
| Max Mainboard Size | Extended ATX |
| Supported Motherboards | ATX, microATX, Extended ATX, SSI CEB, SSI EEB, ITX |
Fractal Design Torrent Tempered Glass Light Tint Case Gray
Delivery between Tue – Thu $37
Fractal Design Torrent Compact Windowed ATX Mid Tower Case, Steel / Light Tint Tempered Glass, 7 Expansion Slots, Up to 360mm Radiator Support, 3x 120
Delivery between 22–29 July $303.24
This is a fantastic case. No regrets, still prefer to any other for me. The look and style is great and coherent, some RGB fans in the front really create a great effect with that grill in the front. The grey is superbly subtly more interesting that black for me personally (and white is not my thing.) [NB: RGB fans *not* included]Some odd short comings though. I could only just fit my 420mm iCUE H170's rad in the front by putting things together in the right order (and sliding in and up ar and angle from the front) 'before' putting the front mount fan rails in after. Unless you want a really hard life (and to risk not be able to pull it off at all) you will want to opt for a 360 rad at most in the front, I got lucky frankly, it worked but only just.. Also ... MoreThis is a fantastic case. No regrets, still prefer to any other for me. The look and style is great and coherent, some RGB fans in the front really create a great effect with that grill in the front. The grey is superbly subtly more interesting that black for me personally (and white is not my thing.) [NB: RGB fans *not* included]Some odd short comings though. I could only just fit my 420mm iCUE H170's rad in the front by putting things together in the right order (and sliding in and up ar and angle from the front) 'before' putting the front mount fan rails in after. Unless you want a really hard life (and to risk not be able to pull it off at all) you will want to opt for a 360 rad at most in the front, I got lucky frankly, it worked but only just.. Also shenanigans were then required to mount fans in the front for RGB aesthetics as well as a rad. I had to mount the rad to the left rail, and fasten that (leaving it floating on the right) and mount my fans to the right rail only and then mount that leaving the fans floating on the left. I'm guessing that would be bad for static pressure, so I used some door draft excludes to help seal that left side, and used the supplied 140's on the back of the rad in a push-pull fan-sandwich configuration (not a problem for sound as the fans run slow and silent unless I'm working so hard my GPU drowns out the as higher loads). I can think of a couple of ways they could have fixed this.My last case was also fractal (which I loved, 12 years old) but this case has the same problem that did. Very little space bind the backplate for cables. You're going to have to make the effort to just to be able to close the rear panel. An extra 3mm would have made a world of difference. I doubt anyone would have said no if it had been 3mm wider, and 8mm taller (to help fit a rad).
Fantastic case that keeps my equipment cool. Probably one of the (if not the) best case on the market at the moment. Absolutely loved building in it and using it.
Excellent case with great cable management and cooling. A breeze to build and looks great.
Good case, easy to build just heavy. Cable management was pretty good
Great case, excellent airflow, bit more difficult than your average build to do water cooling
Went for gray as it's a good middle ground, lovely to build in, have to be careful with GPU model as PSU cables JUST reach a 3070ti TUF, only two gripes are lack of spaces above and to the left for LED strips and the bottom fan tray cannot be removed without removing both front brackets! Would have preferred to just direct mount to the bottom. Overall really pleased with it and can't wait to do a full loop inside this case. Can just about fit modules like the commander, hue and lighting node on the left of the rear panel. I wish they would do an inch space all the way along as there is more than enough internally, maybe too much space either side of a 420 rad.
Case met all expectations and more. It was easy to build in, manage cables and keeps the CPU cool partnering with a bequiet Dark Rock Pro 4.
| General | |
| Form Factor | Tower |
| Windowed Side Panel Material | Tempered glass |
| Max Mainboard Size | Extended ATX |
| Supported Motherboards | ATX, microATX, Extended ATX, SSI CEB, SSI EEB, ITX |
