Lian-Li O11 Dynamic Mini-S Midi-Tower Tempered Glass - White

The case not only looks great with or without any RGB lighting / water-cooling etc. but also the wide but compact form factor allows for great cable management, whilst not taking up an excessive amount of space. The backplates allow for a good amount for customisations, which I've not always seen with mid-range cases, so this is great.The only minor point, which is entirely my fault for not checking, is that it cannot house a standard ATX size PSU so I needed to buy a new one.

Aaron's review of Lian-Li O11D Mini-S Snow Edition Case - White

Pros: Honestly it is beautiful, especially if you want a full white build. It a bit small, but its worth it, especially for the price.Cons: Not much, it would make it a lil taller, because ram clearance was vv tight, especially if you're traying to install an AIO. If it's a 360mm AIO then you'll need to do some slight modding. But overall, I love the case, not much to complain about

Awesome Case

Overall, very good and clean case that transforms as much as you want to. However, it has some compatible issue with ATX motherboard and 360mm AIO installing on the top orientation. mATX MOBO would be working for Top 360mm AIO. Case color is just pure cold white. warm white / off white part will have noticeable color difference.

B&H Always Delivers!!!

One of the best case to use. I often use them for my custom computer business. What's best B&H always delivers!!! Shipped out and had it the next day. If you want to see the final results of the design I did for this case check out @HavocPCs Instagram/TiTok.

Beautiful case with so much modularity. A must for enthusiasts.

I purchased this case to replace my Kolink Phalanx as it was looking a bit outdated and really didn't allow much exposure to the internal components with the RGB setup and water cooling I have installed, and I must say, the case is fantastic. One of the cleanest looking cases on the market right now, in my opinion, especially the 'Snow' edition. The modularity of this case as well for your components (I personally prefer and use ATX motherboards), and the way that the whole thing can basically be stripped down to a hollow cube to allow your to undertake your build is brilliant - I just wish I'd purchased it much sooner. Either way, I'd recommend this case to anyone who has an aesthetically pleasing build and wishes to display it. Also, the case is quite compact ... MoreI purchased this case to replace my Kolink Phalanx as it was looking a bit outdated and really didn't allow much exposure to the internal components with the RGB setup and water cooling I have installed, and I must say, the case is fantastic. One of the cleanest looking cases on the market right now, in my opinion, especially the 'Snow' edition. The modularity of this case as well for your components (I personally prefer and use ATX motherboards), and the way that the whole thing can basically be stripped down to a hollow cube to allow your to undertake your build is brilliant - I just wish I'd purchased it much sooner. Either way, I'd recommend this case to anyone who has an aesthetically pleasing build and wishes to display it. Also, the case is quite compact despite the measurements seeming reasonably mid-sized.

Great case for ATX build w/white 240 AIO & 9 QL120 fans.

I read that it was easy to do an ATX build with this case and they were right. The only tricky part was motherboard power in the upper left hand corner and that was because I had to run the power over the top at the very rear of the case instead of straight over where the plugs are, which I didn't realize until I went to install the top back fan. Also, I had planned to install a white 360 AIO, but I later learned that wouldn't mount properly (there is a hack using ties and one using an offset, neither acceptable to me) , so I changed to a side mounted white Corsair H100i Capellix AIO instead. That AIO comes with two ML120 fans, but I wanted Corsair QL120s, so decided to mount the radiator with the ML120s on the back side of the radiator and two QL120s on the front ... MoreI read that it was easy to do an ATX build with this case and they were right. The only tricky part was motherboard power in the upper left hand corner and that was because I had to run the power over the top at the very rear of the case instead of straight over where the plugs are, which I didn't realize until I went to install the top back fan. Also, I had planned to install a white 360 AIO, but I later learned that wouldn't mount properly (there is a hack using ties and one using an offset, neither acceptable to me) , so I changed to a side mounted white Corsair H100i Capellix AIO instead. That AIO comes with two ML120 fans, but I wanted Corsair QL120s, so decided to mount the radiator with the ML120s on the back side of the radiator and two QL120s on the front side in a push-pull configuration as intake. I mounted three QL120s on the bottom as intake, one QL120 on the rear as exhaust and 3 QL120s on the top as exhaust (11 fans total). All of these lights look fnatastic in this Lian Li O11D Mini Snow White case. I am super happy with the results and highly recommend the case.

Lian Li O11 Dynamic Mini Snow Edition Tempered Glass, weiß

A good pc case in white design from Lian Li O11 Dynamic Mini Snow Edition. It's a case so modern now, has a Midi-tower form-factor, a beautiful design in white colour. Support a lot of components, a gpu up to rtx 4090. Can be installed a power supply of Atx and more little dimensions.

Nice case

All in all, this is a terrific case. Obviously, it will perform very well. You can check out the Gamers Nexus reviews if in doubt. Given the level of side panel workmanship, interesting modification options including reverse assembly, beautiful aesthetics and thermal performance, the €150 price tag is not unreasonable. One star is taken off for the cable management space, although I'd only take off half a star if I could.

Stylish and robust

This case is very nice even without components inside. Can fit 99% of the things you want in it. It is very big one, much bigger than you can believe and see in the picture. Both the height and the width are large, so if you are going to buy this chassis, you need a lot of space on your desk.

stephen's review of Lian-Li O11D Mini-S Snow Edition Case - White

Pros: The customization of this case is amazing so many options to rearrange it to fit anmini-itx to an atx motherboard. Can also change pci slots from 3 to 5 to 7.Cons: My case came with a tiny issue with the extension board need to fit an atx motherboard. One of the screw holes was to small and I was unable to screw 1 out of the 4 screws doesn't seem to effect it at all due to the 3 other screws being in nice and tight. Lian li also said it should be fine.Other than that I love this little case