The ToolPRO Tap and Die Set Metric 24 Piece is built to restore stripped threads and cut new ones into metal where fasteners have worn beyond reuse. The set spans 11 metric sizes from 5mm x 0.80 through 12mm x 1.75, plus 1/8-27 NPT for common imperial work, with both the taps (which cut female threads into holes) and dies (which cut male threads onto rods). Each comes with its matched holder, and the included die holder and tap wrench carry knurled handles for controlled grip during the slow, steady cuts that threading demands. Alloy steel construction keeps the cutting edges true across repeat use, and everything stores in a durable steel case with a moulded plastic tray so you know where each size lives.
The ToolPRO Tap and Die Set Metric 24 Piece is built to restore stripped threads and cut new ones into metal where fasteners have worn beyond reuse. The set spans 11 metric sizes from 5mm x 0.80 through 12mm x 1.75, plus 1/8-27 NPT for common imperial work, with both the taps (which cut female threads into holes) and dies (which cut male threads onto rods). Each comes with its matched holder, and the included die holder and tap wrench carry knurled handles for controlled grip during the slow, steady cuts that threading demands. Alloy steel construction keeps the cutting edges true across repeat use, and everything stores in a durable steel case with a moulded plastic tray so you know where each size lives.
in 3 offers
The lowest price for ToolPRO Tap and Die Set Metric 24 Piece right now is $30.09 at Cash Converters, compared across 3 retailers.
The all-time low was $30.09 on 17 Nov 2026. That's the lowest price we've ever tracked — a great time to buy.
Prices last updated 17 Nov 2026.
ToolPRO Tap and Die Set Metric 24 Piece
The ToolPRO Tap and Die Set Metric 24 Piece is built to restore stripped threads and cut new ones into metal where fasteners have worn beyond reuse. The set spans 11 metric sizes from 5mm x 0.80 through 12mm x 1.75, plus 1/8-27 NPT for common imperial work, with both the taps (which cut female threads into holes) and dies (which cut male threads onto rods). Each comes with its matched holder, and the included die holder and tap wrench carry knurled handles for controlled grip during the slow, steady cuts that threading demands. Alloy steel construction keeps the cutting edges true across repeat use, and everything stores in a durable steel case with a moulded plastic tray so you know where each size lives.
The ToolPRO Tap and Die Set Metric 24 Piece is built to restore stripped threads and cut new ones into metal where fasteners have worn beyond reuse. The set spans 11 metric sizes from 5mm x 0.80 through 12mm x 1.75, plus 1/8-27 NPT for common imperial work, with both the taps (which cut female threads into holes) and dies (which cut male threads onto rods). Each comes with its matched holder, and the included die holder and tap wrench carry knurled handles for controlled grip during the slow, steady cuts that threading demands. Alloy steel construction keeps the cutting edges true across repeat use, and everything stores in a durable steel case with a moulded plastic tray so you know where each size lives.
Last updated at 17/11/2026 15:02:24
Toolpro Metric Black Tap & Die Set
Delivery $22
Toolpro 24 Pc Metric Tap And Die Set. Plu: 273686
Delivery $20
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
ToolPRO Tap and Die Set Metric 24 Piece
Delivery between 20–25 Nov $9.99
originally posted on supercheapauto.com.au
Great to see Imperial size tools still available. Quality of tool is good and it was great value as it didn't cost me a cent as I was credited $70.00 for an item I bought that went on special two weeks after the fact so I was credited the difference to my account!! Cheers!
originally posted on supercheapauto.com.au
All the common imperial sizes. Same quality as the metric set. Does what it needs to, cuts a nice threaded hole, cleans a thread if you really need it to.
originally posted on supercheapauto.com.au
Bought these when they were on special so the whole set didn't cost a whole lot more than a good quality tap.I wasn't expecting much and I wasn't at all surprised. For example, the tap wrench is very loose in all configurations, and the tap doesn't clamp firmly in the jaws, nor does it sit centred or perpendicular.The taps and dies are also nothing special. The taps especially seem to want to go in at an angle, i suspect either the casting or forging was a little asymmetrical or there are some burrs on the teeth. So far the toughest thing I've thrown at the set is M10 threads through a 12mm mild steel plate. The tap was twisting, maybe even 10 degrees without all that much force coming in from me, but it got it done.At that price I shouldn't be complaining. They ... MoreBought these when they were on special so the whole set didn't cost a whole lot more than a good quality tap.I wasn't expecting much and I wasn't at all surprised. For example, the tap wrench is very loose in all configurations, and the tap doesn't clamp firmly in the jaws, nor does it sit centred or perpendicular.The taps and dies are also nothing special. The taps especially seem to want to go in at an angle, i suspect either the casting or forging was a little asymmetrical or there are some burrs on the teeth. So far the toughest thing I've thrown at the set is M10 threads through a 12mm mild steel plate. The tap was twisting, maybe even 10 degrees without all that much force coming in from me, but it got it done.At that price I shouldn't be complaining. They do the job as well as I ever need and they come in a nice foam-lined steel case, so hopefully they will be around for a while.
| Thread Size | 7/16-20 NF |
| Measurement System | Fractional |
| Thread Type | Metric |
| Thread Standard | NPT, NC, NF |
| Type | Plug Tap, Hex Die |
Toolpro Metric Black Tap & Die Set
Delivery $22
Toolpro 24 Pc Metric Tap And Die Set. Plu: 273686
Delivery $20
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
ToolPRO Tap and Die Set Metric 24 Piece
Delivery between 20–25 Nov $9.99
Great to see Imperial size tools still available. Quality of tool is good and it was great value as it didn't cost me a cent as I was credited $70.00 for an item I bought that went on special two weeks after the fact so I was credited the difference to my account!! Cheers!
All the common imperial sizes. Same quality as the metric set. Does what it needs to, cuts a nice threaded hole, cleans a thread if you really need it to.
Bought these when they were on special so the whole set didn't cost a whole lot more than a good quality tap.I wasn't expecting much and I wasn't at all surprised. For example, the tap wrench is very loose in all configurations, and the tap doesn't clamp firmly in the jaws, nor does it sit centred or perpendicular.The taps and dies are also nothing special. The taps especially seem to want to go in at an angle, i suspect either the casting or forging was a little asymmetrical or there are some burrs on the teeth. So far the toughest thing I've thrown at the set is M10 threads through a 12mm mild steel plate. The tap was twisting, maybe even 10 degrees without all that much force coming in from me, but it got it done.At that price I shouldn't be complaining. They ... MoreBought these when they were on special so the whole set didn't cost a whole lot more than a good quality tap.I wasn't expecting much and I wasn't at all surprised. For example, the tap wrench is very loose in all configurations, and the tap doesn't clamp firmly in the jaws, nor does it sit centred or perpendicular.The taps and dies are also nothing special. The taps especially seem to want to go in at an angle, i suspect either the casting or forging was a little asymmetrical or there are some burrs on the teeth. So far the toughest thing I've thrown at the set is M10 threads through a 12mm mild steel plate. The tap was twisting, maybe even 10 degrees without all that much force coming in from me, but it got it done.At that price I shouldn't be complaining. They do the job as well as I ever need and they come in a nice foam-lined steel case, so hopefully they will be around for a while.
Good quality for the price. Restoring an old Honda lawn mower with muffler studs welding themselves into the aluminium head. Pain in the ****, but drilled them out and used this little kit to re-thread. Worked well. Also used it to re-thread various bolts that had gone to the dark side. Happy with the purchase.
It isn’t anything special, however it is in a reasonable price range if you are not too serious. It is one of those times where you get what you pay for. My biggest complaint I would have with it is the tap wrench. If you try to tap something small and back out to clean the thread you just cut, the tap slips on the tap. It is really only built for the largest tap. It isn’t terrible and comes in handy more times than you would think.
I needed to tap several holes and thought this kit was a good price. I followed instructions, was careful and all good. The only thing I wish the tap holder had a finer thread as it comes loose to easily.
Seems a decent little tap and die set, actually has the sizes I need when working on my car.I'm a mechanic by trade and in only a couple of weeks I have already used it several times successfully.
Purchased this 6.6.22M8 1.25 Tap and Die is not to spec. As a result the bolt holes underneath my car are now trashed. I most DEFINITELY do not recommend this product. Will be returning asap and purchasing a more reputable brand
Bought this set today, tried using it on my exhaust flange and immediately snapped in half, leaving itself stuck inside the threads. Was an absolute pain to remove. Taking into supercheap auto tomorrow to return it
I bought this a couple of weeks ago, on sale, and was actually impressed by the value for $$. This is not a top shelf tool, but I was NOT paying for top shelf, just something to adequately do the job. If I was still working in the trade, I would still buy this set as a back up, no problems. For every day use, may be not . As with all taps and dies, use them correctly, the tool cant be blamed for a persons impatient or misuse.
| Thread Size | 7/16-20 NF |
| Measurement System | Fractional |
| Thread Type | Metric |
| Thread Standard | NPT, NC, NF |
| Type | Plug Tap, Hex Die |