Insta-Cure Plus is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE PLUS should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1 separations on one surface, then assemble the parts, letting the pressure spread the CA out.
Insta-Cure Plus is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE PLUS should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1 separations on one surface, then assemble the parts, letting the pressure spread the CA out.
in 7 offers
Insta-Cure Plus is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE PLUS should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1 separations on one surface, then assemble the parts, letting the pressure spread the CA out.
Insta-Cure Plus is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE PLUS should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1 separations on one surface, then assemble the parts, letting the pressure spread the CA out.
Size
Last updated at 15/11/2024 15:57:40
Go to store
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
+ $9.99 delivery
Go to store
+ $15.08 delivery
Go to store
+ $9.95 delivery
Go to store
+ $9.50 delivery
Go to store
+ $14.95 delivery
Go to store
+ $7.99 delivery
Go to store
originally posted on sunwardhobbies.ca
originally posted on sunwardhobbies.ca
originally posted on ebay.com
| Variant | |
| size | 1 Oz |
Updated about 19 hours ago
| Variant | |
| size | 1 Oz |
