Knipex 200mm Snipe Nose Pliers Bent 2621200
Snipe nose side cutting pliers with elastic tips are dimensionally stable even when twisted. They feature distortion-tolerant, elastic precision tips and half-round, long, tapered jaws. The cutting edges are designed for soft, medium-hard, and hard wire, with additional induction hardening that provides a cutting edge hardness of approximately 61 HRC.
Snipe nose side cutting pliers with elastic tips are dimensionally stable even when twisted. They feature distortion-tolerant, elastic precision tips and half-round, long, tapered jaws. The cutting edges are designed for soft, medium-hard, and hard wire, with additional induction hardening that provides a cutting edge hardness of approximately 61 HRC.
Snipe nose side cutting pliers with elastic tips are dimensionally stable even when twisted. They feature distortion-tolerant, elastic precision tips and half-round, long, tapered jaws. The cutting edges are designed for soft, medium-hard, and hard wire, with additional induction hardening that provides a cutting edge hardness of approximately 61 HRC.
Snipe nose side cutting pliers with elastic tips are dimensionally stable even when twisted. They feature distortion-tolerant, elastic precision tips and half-round, long, tapered jaws. The cutting edges are designed for soft, medium-hard, and hard wire, with additional induction hardening that provides a cutting edge hardness of approximately 61 HRC.
in 13 offers
The lowest price for Knipex 200mm Snipe Nose Pliers Bent 2621200 right now is $79.58 at Industrial Shed, compared across 11 retailers.
The all-time low was $37.88 on 17 Mar 2026 — today's price is 110% above the lowest ever. It has been notably cheaper before — worth setting a price alert.
Prices last updated 7 May 2026.
Last updated at 07/05/2026 19:14:04
Knipex 26 21 200 SB Snipe Nose Side Cutting Plier, 200 mm Length
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Knipex - Snipe Nose Pliers Bent 200mm | 2621200SB
Delivery between 8–16 May $7.95
Knipex 200mm Long Nose Bent Side Pliers 2621200SB
Delivery $9.70
Long Nose Cutting Pliers - 2621200 by Knipex
30-day returns
Knipex 2621200SB 200mm Long Nose Bent Side Pliers
Delivery between 14–22 May $9.70
Knipex 2621200 Snipe Nose Side Stork Beak Pliers - 200mm Cutting Edges
Delivery $8
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Knipex - 26 21 200 Snipe Nose Side Cutting Pliers Pvc Grip 200mm (8in)
Delivery $1,520,995.15
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Knipex Snipe Nose Pliers Bent 200mm 2621200
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Knipex 2621200SB - Stork Beak Plier 200mm Snipe Nose
Delivery between 12–21 May $14
Knipex 200mm Long Nose Bent Pliers - 2621200
Delivery $9
originally posted on homeessentialsdirect.com
I can’t say enough good things about Knipex tools. I own a set of cobra pliers that I purchased a couple years back, and I seem to find a reason to use them as often as I can. So when I decided I wanted a new pair of needle nose pliers, I searched for Knipex, and wasn’t disappointed. I really like the form factor on this tool. The narrow jaws on these pliers make getting into tight spots much easier than other tools. 5 stars. Worth every penny you spend.
originally posted on homeessentialsdirect.com
I primarily use needle nose pliers to twist and tighten stainless steel ties and wires of various gauges. ALL needle nose pliers I used in the past get screwed up after just a few twists which put a high lateral load onto just one tip which usually bend out of alignment. Knipex needle tips do twist and get out of alignment under high load, but always go back to their original shape without deforming unlike others. I find this quite fascinating. It's not the strongest needle nose pliers (Snap On is stronger), but this plier seems to be designed to twist and bend under load, and to go back to its original shape and alignment without bending. Snap On pliers are much harder to bend, but once they twist, they are bent permanently. After multiple twists and bending, I can ... MoreI primarily use needle nose pliers to twist and tighten stainless steel ties and wires of various gauges. ALL needle nose pliers I used in the past get screwed up after just a few twists which put a high lateral load onto just one tip which usually bend out of alignment. Knipex needle tips do twist and get out of alignment under high load, but always go back to their original shape without deforming unlike others. I find this quite fascinating. It's not the strongest needle nose pliers (Snap On is stronger), but this plier seems to be designed to twist and bend under load, and to go back to its original shape and alignment without bending. Snap On pliers are much harder to bend, but once they twist, they are bent permanently. After multiple twists and bending, I can still pick up a single strand of hair with Knipex pliers. My Snap On plier can not.
originally posted on homeessentialsdirect.com
Knipex is a great German brand. The quality is really high. That being said, it doesn't seem that these are too much better than my Channellock brand long nose pliers if at all better. I don't regret the purchase of any Knipex tools though. The "Pliers Wrench" and "Cobra" adjustable pliers are great. It is the unique Knipex tools that are more impressive. Maybe buy the long needle nose pliers from Channellock and save the money for the unique Knipex pliers. Or maybe keep them all Knipex so they match :)This is high quality and matches those but is pretty similar to slightly less expensive Channellock long nose pliers. If the price doesn't bother you, these are very nice.
| Tip Width | 3mm |
| Tip Thickness | 2.5mm |
| Gripping Surface Length | 23mm |
| Head Width | 18mm |
| Dimensions (L x W x H) | 200mm x 47mm x 13mm |
Knipex 26 21 200 SB Snipe Nose Side Cutting Plier, 200 mm Length
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Knipex - Snipe Nose Pliers Bent 200mm | 2621200SB
Delivery between 8–16 May $7.95
Knipex 200mm Long Nose Bent Side Pliers 2621200SB
Delivery $9.70
Long Nose Cutting Pliers - 2621200 by Knipex
30-day returns
Knipex 2621200SB 200mm Long Nose Bent Side Pliers
Delivery between 14–22 May $9.70
I can’t say enough good things about Knipex tools. I own a set of cobra pliers that I purchased a couple years back, and I seem to find a reason to use them as often as I can. So when I decided I wanted a new pair of needle nose pliers, I searched for Knipex, and wasn’t disappointed. I really like the form factor on this tool. The narrow jaws on these pliers make getting into tight spots much easier than other tools. 5 stars. Worth every penny you spend.
I primarily use needle nose pliers to twist and tighten stainless steel ties and wires of various gauges. ALL needle nose pliers I used in the past get screwed up after just a few twists which put a high lateral load onto just one tip which usually bend out of alignment. Knipex needle tips do twist and get out of alignment under high load, but always go back to their original shape without deforming unlike others. I find this quite fascinating. It's not the strongest needle nose pliers (Snap On is stronger), but this plier seems to be designed to twist and bend under load, and to go back to its original shape and alignment without bending. Snap On pliers are much harder to bend, but once they twist, they are bent permanently. After multiple twists and bending, I can ... MoreI primarily use needle nose pliers to twist and tighten stainless steel ties and wires of various gauges. ALL needle nose pliers I used in the past get screwed up after just a few twists which put a high lateral load onto just one tip which usually bend out of alignment. Knipex needle tips do twist and get out of alignment under high load, but always go back to their original shape without deforming unlike others. I find this quite fascinating. It's not the strongest needle nose pliers (Snap On is stronger), but this plier seems to be designed to twist and bend under load, and to go back to its original shape and alignment without bending. Snap On pliers are much harder to bend, but once they twist, they are bent permanently. After multiple twists and bending, I can still pick up a single strand of hair with Knipex pliers. My Snap On plier can not.
Knipex is a great German brand. The quality is really high. That being said, it doesn't seem that these are too much better than my Channellock brand long nose pliers if at all better. I don't regret the purchase of any Knipex tools though. The "Pliers Wrench" and "Cobra" adjustable pliers are great. It is the unique Knipex tools that are more impressive. Maybe buy the long needle nose pliers from Channellock and save the money for the unique Knipex pliers. Or maybe keep them all Knipex so they match :)This is high quality and matches those but is pretty similar to slightly less expensive Channellock long nose pliers. If the price doesn't bother you, these are very nice.
Man, I gotta hand it to them, they are almost as good as Americans. Just magnificent craftsmanship. Everything about these pliers is perfect. The steel, the machining, the fit and function. Those guys are good.I am a patriot. I will spend the extra money to buy American. But if I can’t find exactly what I want from an American manufacturer, my second choice is always German. I have a number of Knipex tools and every one is excellent. These are the best needle-nose pliers I have ever used.I was machinist for nearly 35 years and I do know a little something about tools. These are the ones to buy.I still love my country more than I can even say, but I really like German tools.I very highly recommendMade in Germany ????(did I mention that? lol)Thanks for reading
Ever since using the cobra channel locks, I've been a fan of Knipex products. They make quality tools and this is no exception. The length is nice, good for getting in there and holds a solid grip. The handles have a smooth coating which is a little slippery but overall a great tool
Simply the finest pair of long nosed pliers I have ever used, and I have used a bunch. If I have grabbed a pair of long nose it usually means I am getting ready to do something hateful and I am already thinking of the colorful language I am gong to use before the job is complete. These things are so good I am forgetting some of my best cuss words.
These are very well made pliers. But there’s just too much flex to be ideal for one of my daily primary uses; caving in/twisting out box knockouts. I’ll definitely keep these around for the slimmer profile and tips to get into tight areas. But the rigidity of the Klein’s are more in line with my day to day use case on the job as an electrician.
These are, by far, the best. No question. Made in Germany. A superior grade of steel. The jaws hold up to literally -tons- of abuse. The cutting edge eats through whatever I throw at it. I use these for just about anything- without hesitation.I have had dozens of needle-nose pliers, long nose, curved, etc. They are kind of a staple to everyday tinkering, fixing, adjustments, for the shop, home, auto stuff- it's immensely useful. These are definitely the best I have ever owned.
This is worth the extra few bucks, and at a little over $20 should be your FIRST set of needle nose. I have 8 different brands of these, and there is NO comparison. Movement is smooth as silk, and the fit and finish is exceptional. Snap on probably charges and arm and a leg, but there is no way they're better than these, at a fraction of the cost. One of the best tools I've ever bought.
well made. holding the pliers, well bending the wire not bad. pliers ease to grip all kind of wire pretty good. when holding this pliers feel little thinner, tiny so could be thicker of course yes, its too pricy ? yes for me but u upto u. Overal little pricy, well made worth the penny long run I hope coz Made in Germany yei
| Tip Width | 3mm |
| Tip Thickness | 2.5mm |
| Gripping Surface Length | 23mm |
| Head Width | 18mm |
| Dimensions (L x W x H) | 200mm x 47mm x 13mm |
