Lian Li PC-O11 Dynamic Tempered Glass Mid Tower PC Case White
E-ATX, ATX, Micro-ATX, Mini-ITX Support, Aluminum Frame + Tempered Glass Panels, 3 x 2.5" / 3.5" Drive Bays, 1 x 2.5" Drive Bay, 2 x 2.5" Drive Mounts, 8 x Expansion Slots, 2 x USB 3.1 Type-A, 1 x USB Type-C, 3.5mm Audio Out - 3.5mm Audio In, 4 x Filtered Air Intakes Enhance your computer build with stand-out aesthetics using the white O11 Dynamic Mid-Tower Case from Lian Li. With support for E-ATX ATX micro-ATX and mini-ITX motherboards this modern style mid-tower aluminum case features tempered glass front and side panels that allow people to see the beauty of your build. Filtered air intakes are located on the top two ends of the side panel and the bottom of the case supporting up to two 140mm fans three 120mm fans and three 120mm fans respectively. Or you can install a 360mm radiator a 240mm radiator and a 280mm radiator across the top side and bottom for liquid cooling. The O11 Dynamic has eight full-size expansion slots alongside drive cages that support a total of four 2.5 drives three 3.5 drives or a combination thereof. Two additional 2.5 drive mounts are located at the bottom of the case. This case also includes two USB 3.1 Gen 1 Type-A ports one USB 3.1 Gen 1 Type-C port and two separate 3.5mm audio jacks for your headphones and microphone.
E-ATX, ATX, Micro-ATX, Mini-ITX Support, Aluminum Frame + Tempered Glass Panels, 3 x 2.5" / 3.5" Drive Bays, 1 x 2.5" Drive Bay, 2 x 2.5" Drive Mounts, 8 x Expansion Slots, 2 x USB 3.1 Type-A, 1 x USB Type-C, 3.5mm Audio Out - 3.5mm Audio In, 4 x Filtered Air Intakes Enhance your computer build with stand-out aesthetics using the white O11 Dynamic Mid-Tower Case from Lian Li. With support for E-ATX ATX micro-ATX and mini-ITX motherboards this modern style mid-tower aluminum case features tempered glass front and side panels that allow people to see the beauty of your build. Filtered air intakes are located on the top two ends of the side panel and the bottom of the case supporting up to two 140mm fans three 120mm fans and three 120mm fans respectively. Or you can install a 360mm radiator a 240mm radiator and a 280mm radiator across the top side and bottom for liquid cooling. The O11 Dynamic has eight full-size expansion slots alongside drive cages that support a total of four 2.5 drives three 3.5 drives or a combination thereof. Two additional 2.5 drive mounts are located at the bottom of the case. This case also includes two USB 3.1 Gen 1 Type-A ports one USB 3.1 Gen 1 Type-C port and two separate 3.5mm audio jacks for your headphones and microphone.
E-ATX, ATX, Micro-ATX, Mini-ITX Support, Aluminum Frame + Tempered Glass Panels, 3 x 2.5" / 3.5" Drive Bays, 1 x 2.5" Drive Bay, 2 x 2.5" Drive Mounts, 8 x Expansion Slots, 2 x USB 3.1 Type-A, 1 x USB Type-C, 3.5mm Audio Out - 3.5mm Audio In, 4 x Filtered Air Intakes Enhance your computer build with stand-out aesthetics using the white O11 Dynamic Mid-Tower Case from Lian Li. With support for E-ATX ATX micro-ATX and mini-ITX motherboards this modern style mid-tower aluminum case features tempered glass front and side panels that allow people to see the beauty of your build. Filtered air intakes are located on the top two ends of the side panel and the bottom of the case supporting up to two 140mm fans three 120mm fans and three 120mm fans respectively. Or you can install a 360mm radiator a 240mm radiator and a 280mm radiator across the top side and bottom for liquid cooling. The O11 Dynamic has eight full-size expansion slots alongside drive cages that support a total of four 2.5 drives three 3.5 drives or a combination thereof. Two additional 2.5 drive mounts are located at the bottom of the case. This case also includes two USB 3.1 Gen 1 Type-A ports one USB 3.1 Gen 1 Type-C port and two separate 3.5mm audio jacks for your headphones and microphone.
E-ATX, ATX, Micro-ATX, Mini-ITX Support, Aluminum Frame + Tempered Glass Panels, 3 x 2.5" / 3.5" Drive Bays, 1 x 2.5" Drive Bay, 2 x 2.5" Drive Mounts, 8 x Expansion Slots, 2 x USB 3.1 Type-A, 1 x USB Type-C, 3.5mm Audio Out - 3.5mm Audio In, 4 x Filtered Air Intakes Enhance your computer build with stand-out aesthetics using the white O11 Dynamic Mid-Tower Case from Lian Li. With support for E-ATX ATX micro-ATX and mini-ITX motherboards this modern style mid-tower aluminum case features tempered glass front and side panels that allow people to see the beauty of your build. Filtered air intakes are located on the top two ends of the side panel and the bottom of the case supporting up to two 140mm fans three 120mm fans and three 120mm fans respectively. Or you can install a 360mm radiator a 240mm radiator and a 280mm radiator across the top side and bottom for liquid cooling. The O11 Dynamic has eight full-size expansion slots alongside drive cages that support a total of four 2.5 drives three 3.5 drives or a combination thereof. Two additional 2.5 drive mounts are located at the bottom of the case. This case also includes two USB 3.1 Gen 1 Type-A ports one USB 3.1 Gen 1 Type-C port and two separate 3.5mm audio jacks for your headphones and microphone.
in 6 offers
The lowest price for Lian Li PC-O11 Dynamic Tempered Glass Mid Tower PC Case White right now is $119.00 at Crox Development, compared across 6 retailers.
The all-time low was $99.00 on 27 Dec 2025 — today's price is 20% above the lowest ever. That's a little above the best price we've seen.
Prices last updated 27 Sept 2026.
Last updated at 27/09/2026 13:44:53
Lian-Li O11 Dynamic Case (White) Ex Demo (Slight Pink Tinge)
Delivery $35
Lian Li O11 Dynamic Tempered Glass on The Front Chassis Body, SECC ATX Mid Tower Gaming Computer Case, White | PC-O11DW
Delivery between 30 Sept – 7 Oct $238.07
Lian Li O11 Dynamic Tempered Glass Case White
60-day returns
Lian Li PC-O11D Dynamic Tempered Glass Mid Tower Case - White
Lian Li PC-O11D Dynamic Tempered Glass Mid Tower Case - White
30-day returns
LIAN-LI PC-011 - Full Tower Case, Dynamic, White
Delivery $210.04
originally posted on microcenter.com
I needed to upgrade my case due to a graphics card being to large for the previous one. I was worriedthat a bit wider of a case, compared to previously owned cases would be a problem for space but turned out its a much better design. The width gives you a place to hide cables and the power supply (bulkiest un-asthetically pleasing pieces of the computer). Also the brushed metal on the front of the case tied in with the glass make my RGB pop compared to a flat colored case. Keeps my components cooler than my previously open-aired case did and has enough fan spots to turn the thing into a wind tunnel. Highly suggest this purchase!
originally posted on microcenter.com
This case provides an excellent display for the various features I enjoy. All fans are easily visible, there is even room for over 9 fans (I currently run 6). The glass is heavy duty/durable, cleans easily, and showcases all parts. With two main angles (front + side). One of the best design points is with the wall/core barrier that the motherboard attaches to, as it allows for all cords to run behind something to be connected in the back, so everything looks super clean.Feeling responsible to find a downside, I would have to say it’s weight. With no handles for ease of picking up, it is a relatively heavy case. However, I don’t move it now so it’s not much of a complaint.
originally posted on bhphotovideo.com
They really thought of everything when they designed this. There were probably at least 3 moments during building that I found cool little things they incorporated to make the access and cable management easier. They even included a little organizer for the hardware. Every single panel comes off with easy and everything is so accessible. This is my 4th build and this is the best experience I've had building a pc. This case made everything so much easier.
| Motherboard Support | ATX, E-ATX, Micro-ATX, Mini-ITX |
| Internal Drive Bays | 3 x 2.5/3.5" And 1 x 2.5" |
| Additional Drive Mounting | 2 x 2.5" (Bottom) |
| Expansion Slots | 8 x Full Height |
| Maximum GPU Length | 16.54" / 420 mm |
Lian-Li O11 Dynamic Case (White) Ex Demo (Slight Pink Tinge)
Delivery $35
Lian Li O11 Dynamic Tempered Glass on The Front Chassis Body, SECC ATX Mid Tower Gaming Computer Case, White | PC-O11DW
Delivery between 30 Sept – 7 Oct $238.07
Lian Li O11 Dynamic Tempered Glass Case White
60-day returns
Lian Li PC-O11D Dynamic Tempered Glass Mid Tower Case - White
Lian Li PC-O11D Dynamic Tempered Glass Mid Tower Case - White
30-day returns
I needed to upgrade my case due to a graphics card being to large for the previous one. I was worriedthat a bit wider of a case, compared to previously owned cases would be a problem for space but turned out its a much better design. The width gives you a place to hide cables and the power supply (bulkiest un-asthetically pleasing pieces of the computer). Also the brushed metal on the front of the case tied in with the glass make my RGB pop compared to a flat colored case. Keeps my components cooler than my previously open-aired case did and has enough fan spots to turn the thing into a wind tunnel. Highly suggest this purchase!
This case provides an excellent display for the various features I enjoy. All fans are easily visible, there is even room for over 9 fans (I currently run 6). The glass is heavy duty/durable, cleans easily, and showcases all parts. With two main angles (front + side). One of the best design points is with the wall/core barrier that the motherboard attaches to, as it allows for all cords to run behind something to be connected in the back, so everything looks super clean.Feeling responsible to find a downside, I would have to say it’s weight. With no handles for ease of picking up, it is a relatively heavy case. However, I don’t move it now so it’s not much of a complaint.
They really thought of everything when they designed this. There were probably at least 3 moments during building that I found cool little things they incorporated to make the access and cable management easier. They even included a little organizer for the hardware. Every single panel comes off with easy and everything is so accessible. This is my 4th build and this is the best experience I've had building a pc. This case made everything so much easier.
Pros: -very customisable. you can have 9 fans if you desire and as a result of the fan locations and the vents, this case just spews out the hot air and keeps everything inside cool.-easy to disassemble, you simply unscrew the thumb nuts on the top cover, slide it to the back to loosen it and lift and then panel can simply be slid out of their stands no fuss.-cable management, lots of room at the back for cable once you remove the cover behind the motherboard stand offs. I have 9 EK DRGB fans and so I had a 10x daisy chain for my lights and AIO pump along with PMW fan cables and my PSU cables and (if managed correctly) you can keep it looking tidy by re-screwing the back cover in which is a really neat idea. Loads of hooks, frames, grommets and slots to move cables ... MorePros: -very customisable. you can have 9 fans if you desire and as a result of the fan locations and the vents, this case just spews out the hot air and keeps everything inside cool.-easy to disassemble, you simply unscrew the thumb nuts on the top cover, slide it to the back to loosen it and lift and then panel can simply be slid out of their stands no fuss.-cable management, lots of room at the back for cable once you remove the cover behind the motherboard stand offs. I have 9 EK DRGB fans and so I had a 10x daisy chain for my lights and AIO pump along with PMW fan cables and my PSU cables and (if managed correctly) you can keep it looking tidy by re-screwing the back cover in which is a really neat idea. Loads of hooks, frames, grommets and slots to move cables around the case. Very nicely handled. Also comes with more screws than you need (in the white hardware box tucked away in the tray in the back of the case)Looks beautiful once you get everything inside.Cons: -I do find the case would have benefitted from a little bit of extra height at the bottom so my fans weren’t so close my motherboard as this prevented me from installing all 9 fans I had and only 8 (as my front panel usb header was on the bottom of the motherboard and the middle fan blocked me from plugging in the cable.)-BE AWARE, not enough head room for some of the best air coolers. The noctua DH15 won’t fit in here, neither will the dark rock pro 4 so please be aware of that before buying. I bought an AIO and it fits wonderfully in the case and looks beautiful...but for a beginner, I think the Lian Li Lancool 2 mesh RGB would be a much more convenient case-no other flaws, perfect for someone who knows what they’re doing. And even for beginners I could recommend, this was my first pc but I did lots of research prior to building so I was better prepared. If you do pick this case, make sure you buy a motherboard that supports 9 fans if you instead all 9 fan slots
This case fits. It exactly meets the space and components needs to complete a custom PC build.Interior: particular attention to venting and cooling provides top, bottom and one side venting through magnetic screens -- which make dust-out maintenance easy. The top and one side are designed for cooling fan arrays under the screens.The other side and the front are glass panels for constant visual access and efficient component swaps. Through these slightly-tinted panels, Lian Li fans and programmable memory cards can add diffused workspace light in choices of pleasing patterns and tones.The front has state-of-the-art and readily accessible ports for mic and headphone jacks, one Type C and two Type A ports, all vertically aligned to the right of the front glass. ... MoreThis case fits. It exactly meets the space and components needs to complete a custom PC build.Interior: particular attention to venting and cooling provides top, bottom and one side venting through magnetic screens -- which make dust-out maintenance easy. The top and one side are designed for cooling fan arrays under the screens.The other side and the front are glass panels for constant visual access and efficient component swaps. Through these slightly-tinted panels, Lian Li fans and programmable memory cards can add diffused workspace light in choices of pleasing patterns and tones.The front has state-of-the-art and readily accessible ports for mic and headphone jacks, one Type C and two Type A ports, all vertically aligned to the right of the front glass. My practical and optics preference is to prevent gravity damages and avoid a "spaghetti" appearance. Putting ports near the bottom instead of the top would put peripherals on the desk without foot-long cables to be caught in mishap. Also, the design encourages putting cabled devices on the top of the case. Still, that port placement is the only recommended adaptation.Backside, not only is there the usual space for motherboard plug-ins, monitors and USB ports: this case also offers ample customizing slots for more venting, as well as those additional drives, cards, ports and devices that support the most universal users.
This is a very diverse case with multi configuration features. But keep in mind that everything come with a price. This config spec is very cool but again this can get very pricey.GPU – AMD Thread ripper 24 coreMotherboard – ATXe MSI Creator (OC to 4500)GPU – RTX 3080 XC3 Ultra Gaming (10gig DDR5)Ram – 8 X 3200hz Corsair RGB memory (OC to 3600)7 Fans2 X 360 Corsair RadiatorsBitspower Distro plate with pump (disconnected)EK PumpEK CPU Water BlockOcool GPU water blockCorsair 1200 Power PlantSet of Blue CablemodsAnd of course, the Lian Li case.Please understand though everything mentioned is possible but not recommended for a build inside this case. GPU runs from 32 C to 40 C and the CPU 40 C to 50 C at idle to 2 to 3 percent usage.18 ... MoreThis is a very diverse case with multi configuration features. But keep in mind that everything come with a price. This config spec is very cool but again this can get very pricey.GPU – AMD Thread ripper 24 coreMotherboard – ATXe MSI Creator (OC to 4500)GPU – RTX 3080 XC3 Ultra Gaming (10gig DDR5)Ram – 8 X 3200hz Corsair RGB memory (OC to 3600)7 Fans2 X 360 Corsair RadiatorsBitspower Distro plate with pump (disconnected)EK PumpEK CPU Water BlockOcool GPU water blockCorsair 1200 Power PlantSet of Blue CablemodsAnd of course, the Lian Li case.Please understand though everything mentioned is possible but not recommended for a build inside this case. GPU runs from 32 C to 40 C and the CPU 40 C to 50 C at idle to 2 to 3 percent usage.18 fittings, 12 X 90-degree fittings 8 X extensions and two LED strips.
This case is awesome. It looks great and has lots of room. However, after taking the time to place all of my hardware and run all of my wires I found out that for one reason or another the power switch doesn’t work. So for a few days I had to use a screwdriver to jump the power pins. Then I bought a remote starter for it and now it works well. I’m giving the case 3 stars because the front panel cables didn’t work in any orientation so I had to buy a different product just to use it. But there is plenty of room to keep cables organized and make upgrades to my PC.
This is an excellent case and ordering through B&H made the whole experience better. I actually ordered the Razer version of this same case from Newegg and it took over a week to get to me. This white case from B&H took two days, thanks to free expedited shipping. The case itself is great because it moves the power supply to the back so the front becomes a showcase for the motherboard and AIO as well as however many fans you put in. I built this white case with mostly white components including a 360mm AIO and 9 fans. It looks great with the black frame around the side glass.
built my new pc mid-March 2023. I was indecisive about the case but ended up getting this because I liked how simple it was, and because of the glass panels on the front and side. Heavier than I thought it'd be, but thats ok. Tons of space, I wasn't struggling trying to get things to fit properly.Also with that space, airflow is pretty good. DOESN'T COME WITH FANS! My fault for not checking, I assumed it would come with some fans.Picture isn't great because I took it under my desk where it sits :p
I wanted to go for a mid-tower case because the XL was too big. I wanted to build a custom water cooling loop and this case is the perfect size! So much room in the back for clean cable management. Removeable cages are very helpful as well. Mounted triple 360 rads with no clearance issues whatsoever (although for the side rad, I went with the low profile noctua fans just in case). Lots of room to work with and good build quality. Highly recommend!
| Motherboard Support | ATX, E-ATX, Micro-ATX, Mini-ITX |
| Internal Drive Bays | 3 x 2.5/3.5" And 1 x 2.5" |
| Additional Drive Mounting | 2 x 2.5" (Bottom) |
| Expansion Slots | 8 x Full Height |
| Maximum GPU Length | 16.54" / 420 mm |
