This Ryobi 3 in 1 Air Brad Nailer/Stapler is the perfect addition to any workshop with an air compressor. The unit fires C-Series brad nails ranging from 32-64 mm, C1-Series brad nails ranging from 15-50mm as well as 6000-Series narrow crown staples ranging from 16-40 mm, to suit a wide range of fastening applications.
This Ryobi 3 in 1 Air Brad Nailer/Stapler is the perfect addition to any workshop with an air compressor. The unit fires C-Series brad nails ranging from 32-64 mm, C1-Series brad nails ranging from 15-50mm as well as 6000-Series narrow crown staples ranging from 16-40 mm, to suit a wide range of fastening applications.
in 6 offers
Ryobi Airwave 3 in 1 Air Brad Nailer and Stapler - RA-NBS1664-S
This Ryobi 3 in 1 Air Brad Nailer/Stapler is the perfect addition to any workshop with an air compressor. The unit fires C-Series brad nails ranging from 32-64 mm, C1-Series brad nails ranging from 15-50mm as well as 6000-Series narrow crown staples ranging from 16-40 mm, to suit a wide range of fastening applications.
This Ryobi 3 in 1 Air Brad Nailer/Stapler is the perfect addition to any workshop with an air compressor. The unit fires C-Series brad nails ranging from 32-64 mm, C1-Series brad nails ranging from 15-50mm as well as 6000-Series narrow crown staples ranging from 16-40 mm, to suit a wide range of fastening applications.
The lowest price for Ryobi Airwave 3 in 1 Air Brad Nailer and Stapler - RA-NBS1664-S right now is $49.00 at Cash Converters, compared across 5 retailers.
The all-time low was $21.00 on 20 Mar 2026 — today's price is 133% above the lowest ever. It has been notably cheaper before — worth setting a price alert.
Prices last updated 10 June 2026.
Last updated at 10/06/2026 12:32:16
Ryobi Ra-Nbs1664-S Air Brad Nailer/Stapler Air Nailer
Delivery $12.50
Ryobi Airwave 3 In 1 Air Brad Nailer And Stapler
Free delivery
Ryobi Airwave 3 In 1 Brad Nailer & Stapler (new) Ra-nbs1664-s Genuine
Delivery $10.99
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Ryobi Airwave 3 In 1 Brad Nailer & Stapler (new) Ra-nbs1664-s Genuine
Delivery $14.90
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Ryobi Airwave 3 In 1 Air Brad Nailer And Stapler
Free next-day delivery
Ryobi Airwave 3 in 1 Air Brad Nailer And Stapler
Free next-day delivery
originally posted on ryobi.co.nz
Re-trimming our home after laying new flooring and found that the brad nailer perfect for the job quick and easy too use
originally posted on ryobi.co.nz
I wanted to deck out the back of my camper van starting with a blank shell. Purchased the 3 in 1 Brad Nailer to complete the cabinet fit out. 👍
originally posted on bunnings.com.au
On paper it looked like a bargain but there is a reason why these are so cheap.In my case it didn’t fire a single nail. 6 bar at the compressor (within specs) and air just leaked at the exhaust. Whacked it and worked for a couple dry fires than leaked again.It goes back to Bunnings and will buy a decent one, even for occasional use.You get why you pay for.
| Total Weight | 2.46kg |
| Charger Included | No |
| Minimum fastener size | 64 |
| Commercial | No |
| Switch Type | Single Sequential |
Ryobi Ra-Nbs1664-S Air Brad Nailer/Stapler Air Nailer
Delivery $12.50
Ryobi Airwave 3 In 1 Air Brad Nailer And Stapler
Free delivery
Ryobi Airwave 3 In 1 Brad Nailer & Stapler (new) Ra-nbs1664-s Genuine
Delivery $10.99
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Ryobi Airwave 3 In 1 Brad Nailer & Stapler (new) Ra-nbs1664-s Genuine
Delivery $14.90
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Ryobi Airwave 3 In 1 Air Brad Nailer And Stapler
Free next-day delivery
Re-trimming our home after laying new flooring and found that the brad nailer perfect for the job quick and easy too use
I wanted to deck out the back of my camper van starting with a blank shell. Purchased the 3 in 1 Brad Nailer to complete the cabinet fit out. 👍
On paper it looked like a bargain but there is a reason why these are so cheap.In my case it didn’t fire a single nail. 6 bar at the compressor (within specs) and air just leaked at the exhaust. Whacked it and worked for a couple dry fires than leaked again.It goes back to Bunnings and will buy a decent one, even for occasional use.You get why you pay for.
I would of given a 5 star rating except my brad bailer/stapler stopped working. Ryobi has a great warranty and my item was replaced. I like how it doubles as a brad and staple gun which makes it ideal for the home handyman.
I bought this 3 in 1 nailer for a home project and could not be happier, its so easy to use and no jamming. There is toeless change if it does, unlike my old one.Most of my small power tools are Ryobi and I don't have issues.
Good economy gun. Has a bit of an issue with 65mm brads into hardwoods, other than that no problems.
It works well and offers flexibility with smaller nailing projects, however:1.- It jammed on me, and I had to disassemble the front because the slightly corroded steel hammer was jammed against the staple.2.- The front lever to open the conduit bent trying to close it again.
I used this maybe a dozen times building a few Bee Boxes, always oild and maintained it, went to use it today and first go the hammer slide fell apart, which means the part that pushes the nail into the wood, no longer slides in or out, what ever holds it together in the air chamber has broken.Don't waste your money on this cheap crap, I doubt it would do even one house of Architrave in one use before the hammer part died.I would say that as a Home Handy manunit it's a flop and no Tradesman would buy this so not sure who it's made for except the Home handy man that would use it on the odd job and the two year warranty would be over before it has been used many times at all, so a sucker buy or throw away, Buy a decent brand like I had to today to replace this ... MoreI used this maybe a dozen times building a few Bee Boxes, always oild and maintained it, went to use it today and first go the hammer slide fell apart, which means the part that pushes the nail into the wood, no longer slides in or out, what ever holds it together in the air chamber has broken.Don't waste your money on this cheap crap, I doubt it would do even one house of Architrave in one use before the hammer part died.I would say that as a Home Handy manunit it's a flop and no Tradesman would buy this so not sure who it's made for except the Home handy man that would use it on the odd job and the two year warranty would be over before it has been used many times at all, so a sucker buy or throw away, Buy a decent brand like I had to today to replace this useless paper weight.
Bought this rather than separate nail gun and stapler. Should have bought them separately. As this is made for nails and staples when you require to push a nail further into timber and then fill the indent it is bthe width of the staple so the nail is on the left with about 5mm longer indent. Better to get a separate gun for each.
I bought the tool as it is very versatile and does 16/18 Ga and staples.Very happy with the results doing my skirt board, and drove 50mm 16Ga into hardwood. There were only a couple which I had to manually punch in.
| Total Weight | 2.46kg |
| Charger Included | No |
| Minimum fastener size | 64 |
| Commercial | No |
| Switch Type | Single Sequential |
