Add 4 Gigabit Power over Ethernet ports to a PCI Express-enabled computer. The ST4000PEXPSE 4-Port PoE NIC lets you add four Gigabit Power over Ethernet ports through a single PCI Express slot. Each port can provide up to 25.5W of power, combining network data and power over a single Ethernet cable for reduced cable clutter and added convenience for remote PoE devices. The PCI express PoE card supports the IEEE 802.3at (Type 1 and 2) standard for Power Sourcing Equipment (PSE), and can deliver up to 48V DC power to compliant Powered Devices (PD). This eliminates the need for a separate power source and data connection for PoE devices such as IP cameras, IP phones or wireless access points. Suitable for any standard profile PCIe-enabled client, server or workstation, the PoE network card supports features such as Jumbo Frames (up to 9KB), VLAN tagging and Wake on LAN (WoL). Create a host computer for networked security cameras situated in remote areas, where standard power connection is not possible. Install PoE-powered Wireless Access Points (WAP) or repeaters in industrial, warehousing or business environments. Enable remote installation of touchscreens or information kiosks. Position your network devices where power outlets aren’t available, with 25.5 Watts per-port PoE output. Reduce expenses by using existing standard Cat5 (or better) Ethernet cabling to deliver power and data. Optimize network traffic with support for advanced features, like Jumbo Frames and VLAN tagging.