Victron MultiPlus 12/2000/80-32 230V VE.Bus Inverter/Charger
Multi-functional The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Models range from 800VA to 5000VA per module. Unique PowerAssist feature The MultiPlus will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. Uninterrupted AC power (UPS function) In the event of a grid failure or shore or generator power being disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three-phase and split phase capabilities.
Multi-functional The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Models range from 800VA to 5000VA per module. Unique PowerAssist feature The MultiPlus will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. Uninterrupted AC power (UPS function) In the event of a grid failure or shore or generator power being disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three-phase and split phase capabilities.
Multi-functional The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Models range from 800VA to 5000VA per module. Unique PowerAssist feature The MultiPlus will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. Uninterrupted AC power (UPS function) In the event of a grid failure or shore or generator power being disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three-phase and split phase capabilities.
Multi-functional The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Models range from 800VA to 5000VA per module. Unique PowerAssist feature The MultiPlus will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. Uninterrupted AC power (UPS function) In the event of a grid failure or shore or generator power being disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three-phase and split phase capabilities.
in 34 offers
The lowest price for Victron MultiPlus 12/2000/80-32 230V VE.Bus Inverter/Charger right now is $1,255.00 at ATG Battery Shop, compared across 32 retailers.
The all-time low was $1,069.00 on 10 Oct 2025 — today's price is 17% above the lowest ever. That's a little above the best price we've seen.
Prices last updated 22 June 2026.
Last updated at 22/06/2026 08:28:16
Victron MultiPlus 12/2000/80-32 230V VE.Bus Inverter/Charger
Victron Multiplus Inverter Charger 12/2000/80-32 230v Ve.Bus
Free delivery between 25 June – 2 July
Victron Multiplus 12V/2000VA/80-32 230V VE.BUS Inverter/Charger
Free delivery
Victron MultiPlus 12/2000/80-32 Inverter/Charger PMP122200000
Free delivery
VICTRON Multiplus 12-2000-80-23 230 Ve-Bus
Free delivery
VICTRON Multiplus 12-2000-80-23 230 Ve-Bus
Free delivery
Victron MultiPlus 12/2000/80-32 230V VE.Bus PMP122200000
Free delivery between Wed – Fri
Victron Multiplus 12/2000/80-32
Free delivery
Victron 12V 2000VA MultiPlus 12/2000/80-32 Inverter/Charger
Free next-day delivery
Victron Multiplus 12/2000/80-32
Delivery $14
originally posted on homeessentialsdirect.com
A little large physically, but works well
originally posted on homeessentialsdirect.com
At a min, you have to buy a usb dongle to connect it to you computer to configure it and a usb bluetooth dongle so you can connect to your phone. Plan on at least getting these or they are the most cost-effective way to monitor it, that I know of. The strain relief set up is a joke. Must have been designed by a first-year intern. Still mid install so I may update once installed.
originally posted on sbpe.com.au
Haven’t set to work the item yet but postage was prompt.
| Output Current Rating (Amps) | 80.0 Amps |
| Wattage | 2000W |
| Peak Power | 3500W |
| Output Voltage and Frequency | 230VAC ± 2% / 50Hz ± 0,1% (1) |
| Input Voltage | 38– 66 V |
Victron MultiPlus 12/2000/80-32 230V VE.Bus Inverter/Charger
Victron Multiplus Inverter Charger 12/2000/80-32 230v Ve.Bus
Free delivery between 25 June – 2 July
Victron Multiplus 12V/2000VA/80-32 230V VE.BUS Inverter/Charger
Free delivery
Victron MultiPlus 12/2000/80-32 Inverter/Charger PMP122200000
Free delivery
VICTRON Multiplus 12-2000-80-23 230 Ve-Bus
Free delivery
A little large physically, but works well
At a min, you have to buy a usb dongle to connect it to you computer to configure it and a usb bluetooth dongle so you can connect to your phone. Plan on at least getting these or they are the most cost-effective way to monitor it, that I know of. The strain relief set up is a joke. Must have been designed by a first-year intern. Still mid install so I may update once installed.
Haven’t set to work the item yet but postage was prompt.
Mostly this installed easily, however the AC wire pass-through was just awkward and not easy to get wires through, especially large gauge. Given the price I would think a built in USB connection for configuration on a computer would be a given, but you have to buy an overpriced dongle and an ethernet cable, so consider that as part of the cost, especially if you have LiFePO4 batteries. You can also get a bluetooth dongle, which also needs an ethernet cable, but only for monitoring (and changing mode) right now, and I've not found a way to add it to my BT network of victron devices. If it could join then it would be able to exchange info (like temperature and voltage) with other victron devices such as the battery monitor and solar charge controller. UPDATE You will ... MoreMostly this installed easily, however the AC wire pass-through was just awkward and not easy to get wires through, especially large gauge. Given the price I would think a built in USB connection for configuration on a computer would be a given, but you have to buy an overpriced dongle and an ethernet cable, so consider that as part of the cost, especially if you have LiFePO4 batteries. You can also get a bluetooth dongle, which also needs an ethernet cable, but only for monitoring (and changing mode) right now, and I've not found a way to add it to my BT network of victron devices. If it could join then it would be able to exchange info (like temperature and voltage) with other victron devices such as the battery monitor and solar charge controller. UPDATE You will very likely need to buy the Bluetooth dongle (as well as the USB dongle for setup) if you buy this. For some reason Victron did not include a voltage sense connector in this model, which caused mine to read 0.6v below the actual battery voltage. The BT module has a terminal block with v-sense, and hooking that up seems to fix this voltage issue - or at least the VictronConnect app now reports the right voltage. Even with this though, an inverter load of just ~850W, with v-sense reporting 13.4v, ~250W coming in from solar and 99% SOC reported by the battery monitor, the MultiPlus gives a low battery warning. I'm still waiting for some kind of explanation from the distributor/Victron on what may be the cause of this. Today, for no apparent reason and after 5 days of only annoying low battery warnings, the alarm light came on on the front panel when I switched the inverter on and no power flowed. I switched off the AC main breaker and tried to turn it on multiple times, but still no 120v. Eventually cycling DC power from the battery got it working again, so likely this was a firmware bug, but it doesn't improve my confidence in the product any! UPDATE #2 - the MultiPlus is now working very well. The seller made contact with Victron and between us we figured out the solution - setting the cutoff voltage and alarm voltage lever much lower (10.x volts instead of 12.x v) got rid of the alarms and I've had no more issues with the inverter failing to turn on. My other complaints above remain, but once it works it's a pretty solid piece of equipment. One day I'll get to try out the charger side of this...
Performance and price cannot be beat. I have been nothing but pleased with it. I use it on a school bus conversion with 1600 Watts of solar panel and four 6 V 390 amp hours batteries In series for a 24 V system. Spending the summer in mid Alaska and my batteries never go below 96%.
This is a great unit. My batteries charge quickly off shore power and it can supply AC power that can run my laptop. I also added the remote panel so I can turn it from off -> on -> charging only without crawling under my van's bed to toggle it. Would highly recommend this addition.
Very pleased with the product and the seller.
| Output Current Rating (Amps) | 80.0 Amps |
| Wattage | 2000W |
| Peak Power | 3500W |
| Output Voltage and Frequency | 230VAC ± 2% / 50Hz ± 0,1% (1) |
| Input Voltage | 38– 66 V |