Kreg Sml-c250b-250 Blue-kote Weather Resistant Pocket Hole Screws - 6.4cm , #8

They were perfect for the project I completed. I used them in an unconventional way. I used them with my jig to repair the rotted bottoms of an exterior door. I used them to butt join the old and new replacement pieces. The joints are tight and practically invisible.

Excellent Screws

Used these to build 2x4 framing for insulation within an existing pole barn. Like all other Kreg products, these screws are excellent. The square drive eliminates any possibility of stripping. Highly recommend.

Great Kreg Screws

Working with 1.5 inch lumber, these screws are perfect for my pocket holes. Got more than I needed figuring I'll be usingthese quite often. Plus they are coated for exterior use, so all my outdoor projects will use these when necessary.

Great product

This works excellent for putting together light duty (non structural) 2x4 projects meant for outdoor service. In this case, I used them for a chicken coop, but they are very versatile. Take care to set your torque correctly, as they can pull right through soft pine from time to time.

Great screws

If you have a kreg tool you need screws. The 2.5 inch screw is great for putting together 24 lumber. You really don't need any glue. I build carts and stands out of 2x4 lumber. This is the. Cheapest and best way to do it.

Kreg K-tools and Screw are Perfect Match of my Work

This is most updated of my fence design work. I'm sure there are less people using screw to build the fence. I improve to use the kreg screw that what I found big different as before I used the deck screw which result will splitted the joint. Because with its flat contact on the wood and the Kreg port hole tools that help the work much faster and accurate. I can see the tightness becomes much perfect and tightly. After I complete of it, there is rock solid of the whole frame done.When I shake it there is a solid feel . If there is a 3" screw will much approprite.

Kreg screws

So glad to be able to find this particular Kreg variety of screws, and in a 250 count too! excellent quality, as expected from Kreg. Also received my order quickly! Will definitely order from this supplier again!

Quality design and perfect for exterior conditions

I used these pocket hole screws to assemble a garden bridge made out of redwood. I designed the bridge utilizing the pocket hole jig. This allowed me to have zero screws visible from the standpoint of a pedestrian. They were incredibly strong and while assembling the bridge On its side my support came out holding the handrail up and to my astonishment the screws suspended the entire handrail in the air with 4 feet of leverage and two by sixes and three by threes hanging on them. The customer was thrilled and things couldn't have gone better

Screw Review

The screw appears to work well, but I've just built the custom planters. They haven't had the challenge of many seasons. Sadly, I likely won't even think about posting a review annually over the next 5 years. I'm glad this version of screw is available. One thing to consider is that these can more easily be over tightened. I didn't have stripping, but the pocket would bulge at the same drive force that didn't happen with other screws. Better to set the clutch to under tighten, and increase the force slowly.

Why try anything else?

Save yourself the headache and dont try and pinch a few pennies just buy the Kreg pocket hole screws. I have traveled down the penny p pinching highway and regretted it every time by less expensive screws only to have the bit not fit tightly in the screw head and slip and create some putty touch up work. And they don't have the gripping power and create those solid joint like you get with Kreg. And there is the blue-kote factor. Most other pocket hole screw are for interior use only. You always. Measure twice cut once then drill once and screw once buy the Kreg pocket hole screws.