Peak Design Capture Camera Clip V3 (Black)
The all-new Capture is the most secure and convenient way to carry your camera. Unlike a camera strap, Capture keeps your camera rigidly stable while hiking, biking, or moving around the studio. Unlike a camera bag, Capture keeps your camera instantly accessible with the click of a button. It includes a metal clip that clamps to any backpack strap, belt, or bag, and an Arca tripod-compatible plate that screws into the bottom of your camera. Your camera locks into the clip, where it is held rigidly and securely. Press the lockable quick-release button to remove. It holds well over 200 lbs, making it strong enough for the heaviest of pro camera/lens combinations. You can take your camera out of Capture and put it directly into your ARCA-type tripod with the included standard plate quick-release plate. The clip connects to any strap up to 6.4 cm wide and 2.2 cm thick. The Capture is designed for both men and women, and is suitable for a variety of camera types.
The all-new Capture is the most secure and convenient way to carry your camera. Unlike a camera strap, Capture keeps your camera rigidly stable while hiking, biking, or moving around the studio. Unlike a camera bag, Capture keeps your camera instantly accessible with the click of a button. It includes a metal clip that clamps to any backpack strap, belt, or bag, and an Arca tripod-compatible plate that screws into the bottom of your camera. Your camera locks into the clip, where it is held rigidly and securely. Press the lockable quick-release button to remove. It holds well over 200 lbs, making it strong enough for the heaviest of pro camera/lens combinations. You can take your camera out of Capture and put it directly into your ARCA-type tripod with the included standard plate quick-release plate. The clip connects to any strap up to 6.4 cm wide and 2.2 cm thick. The Capture is designed for both men and women, and is suitable for a variety of camera types.
The all-new Capture is the most secure and convenient way to carry your camera. Unlike a camera strap, Capture keeps your camera rigidly stable while hiking, biking, or moving around the studio. Unlike a camera bag, Capture keeps your camera instantly accessible with the click of a button. It includes a metal clip that clamps to any backpack strap, belt, or bag, and an Arca tripod-compatible plate that screws into the bottom of your camera. Your camera locks into the clip, where it is held rigidly and securely. Press the lockable quick-release button to remove. It holds well over 200 lbs, making it strong enough for the heaviest of pro camera/lens combinations. You can take your camera out of Capture and put it directly into your ARCA-type tripod with the included standard plate quick-release plate. The clip connects to any strap up to 6.4 cm wide and 2.2 cm thick. The Capture is designed for both men and women, and is suitable for a variety of camera types.
The all-new Capture is the most secure and convenient way to carry your camera. Unlike a camera strap, Capture keeps your camera rigidly stable while hiking, biking, or moving around the studio. Unlike a camera bag, Capture keeps your camera instantly accessible with the click of a button. It includes a metal clip that clamps to any backpack strap, belt, or bag, and an Arca tripod-compatible plate that screws into the bottom of your camera. Your camera locks into the clip, where it is held rigidly and securely. Press the lockable quick-release button to remove. It holds well over 200 lbs, making it strong enough for the heaviest of pro camera/lens combinations. You can take your camera out of Capture and put it directly into your ARCA-type tripod with the included standard plate quick-release plate. The clip connects to any strap up to 6.4 cm wide and 2.2 cm thick. The Capture is designed for both men and women, and is suitable for a variety of camera types.
in 30 offers
The lowest price for Peak Design Capture Camera Clip V3 (Black) right now is $109.00 at Borges Imaging, compared across 18 retailers.
The all-time low was $36.39 on 2 June 2026 — today's price is 200% above the lowest ever. It has been notably cheaper before — worth setting a price alert.
Prices last updated 23 June 2026.
Last updated at 23/06/2026 13:58:27
Peak Design Capture Camera Clip v3, Silver - with Standard plate
Delivery between Fri – Tue $15
Peak Design Capture Camera Clip v3, Silver - with Standard plate
Delivery between 30 June – 8 July $9.90
Peak Design Capture Black
Peak Design Capture Camera Clip v3, Silver - with Standard plate
Delivery between 25 June – 3 July $15
Peak Design Capture Clip V3 Black with Plate
Delivery between 25 June – 3 July $15
Peak Design Capture Camera Clip V3+Standard Plate - Black
Delivery between 26 June – 1 July $12.90
Peak Design Capture Camera Clip with Standard Plate v3 (Black)
Free delivery
Peak Design Capture Camera Clip V3 BLACK w/Plate
Free delivery between Thu – Fri
Peak Design Capture Camera Clip with Standard Plate v3 (Black)
Delivery between 26 June – 8 July $10
Peak Design Capture Clip V3 Black with Plate Bag Organisers and Accessories
Delivery between Thu – Fri $9.95
originally posted on bhphotovideo.com
I had been looking for a hands free way to carry my camera when hiking that would allow me fast access to it without having it dangle around my need. The Peak Design Capture Camera Clip looked like an ideal solution. I received it recently and used it extensively on a trip to Acadia National Park last week and have the following feedback.Pros: The unit seems to be well designed/built. It fit easily on my Lowe Flipside 300 camera pack strap. The clip holds the camera securely and removing the camera from the clip is intuitive, fast and easy.Cons: As others have pointed out, the screws that hold the front and back of the clip onto the pack strap will not stay tight. I found I had to tighten them a few turns with every hour or so of use. I am not positive, but I ... MoreI had been looking for a hands free way to carry my camera when hiking that would allow me fast access to it without having it dangle around my need. The Peak Design Capture Camera Clip looked like an ideal solution. I received it recently and used it extensively on a trip to Acadia National Park last week and have the following feedback.Pros: The unit seems to be well designed/built. It fit easily on my Lowe Flipside 300 camera pack strap. The clip holds the camera securely and removing the camera from the clip is intuitive, fast and easy.Cons: As others have pointed out, the screws that hold the front and back of the clip onto the pack strap will not stay tight. I found I had to tighten them a few turns with every hour or so of use. I am not positive, but I think they loosen even when the bag is not in use. This is likely due to the stored spring energy in the compressed pack strap padding. As I am not willing to trust my R5 and lens to just the clip, I always keep the camera strap around my neck when using the clip. For this reason, I would never use the clip on a belt. I plan to clean the screw threads with solvent and then apply Loctite thread lock to see if that stops the screws from loosening. I am not sure if that will work but it cannot hurt. My last 2 issues are minor ones. The camera body attachment is small, to keep the overall size and weight of the clip to a minimum. This plate can be used directly on a tripod head but I am not really comfortable trusting this plate when using a heavy lens (that does not have a tripod mount). For that purpose, I exchange the plate for a larger and beefier plate (don't forget to carry the Allen Key with you). Finally, placing the camera into the clip when using it on a pack strap is a bit challenging. I find I have to pull the strap out from my chest to see the clip to align the camera plate to the clip. It sometimes takes some jiggling to get the two to mate. As I said above, removing the camera is easy. That is more important.So I said a lot in the cons section but overall I am glad I have this unit. Other than a the few small issues outlined, it does the job. I rated the product as 3 stars. One star deducted for the issues described and another deducted for the price, which I think is likely 50-100% higher than it needs to be.
originally posted on bhphotovideo.com
I am a stay at home parent, go hiking 4-6 times a week, and always bring my camera. I was using a PD strap, but with my toddler in the hiking carrier, my neck, shoulders, and back were constantly in pain. I tried cotton carrier, but I prefer it for longer lenses. This clip is perfect. Is it expensive? Sure, but it makes hiking so much easier and more comfortable. I've only been out with it a few times, but my neck and upper back are already feeling much better.I highly recommend this to anyone. Seems simple. Seems expensive. But if you go hiking even once a month, it's worth it imo. Going on a trip and want to have your camera with you everywhere, all day? Get this. It's loads better than a strap for all day wear.
originally posted on bhphotovideo.com
I owned the V2 CapturePRO and used it on my 5DIII, 5DIV and more recently on my R5. I used it on my backpack strap which allowed both of my hands to be free which is great when you are out with the kids. I also loved that the plates were ARCA compatible, so I solely used these plates on my tripods. No additional plates (tripod brand specific, or otherwise) required. The V3 is a great upgrade. The clip is significantly lighter and thinner. = The plate release button on the upper left also functions super smooth without any hesitation. I noticed the V2 would lock up or resist from time to time and required some shaking before the plate (with attached camer) was able to be removed. The plate on the V3 is also a lot smaller compared to the V2 with a much lower profile. ... MoreI owned the V2 CapturePRO and used it on my 5DIII, 5DIV and more recently on my R5. I used it on my backpack strap which allowed both of my hands to be free which is great when you are out with the kids. I also loved that the plates were ARCA compatible, so I solely used these plates on my tripods. No additional plates (tripod brand specific, or otherwise) required. The V3 is a great upgrade. The clip is significantly lighter and thinner. = The plate release button on the upper left also functions super smooth without any hesitation. I noticed the V2 would lock up or resist from time to time and required some shaking before the plate (with attached camer) was able to be removed. The plate on the V3 is also a lot smaller compared to the V2 with a much lower profile. The locking screws seem to screw in easier and I find that the entire process of getting the clip onto my backpack strap is just easier. The screws seems longer, which allows for more room and manuevering around the backpack strap...which may be why it seems easier to get on and off. Both V2 and V3 plates had holes to attach Peak Design anchors to. One thing to mention is that the width of clip on the V3 is a bit narrower as compared to the V2. The V3 is 3 while the V2 is 2.5. So those who intend to attach the clip on straps larger than 2.5 may want to test it out before buying. I was able to get my around my 2.7 backpack strap with a little effort.
| Compatible with | Cameras |
| Length | 5.5 inches |
| Product dimensions | 13.97 x 13.97 x 4.32 cm; 144.58 Grams |
| Is discontinued by manufacturer | No |
| Mounting type | Tripod |
Peak Design Capture Camera Clip v3, Silver - with Standard plate
Delivery between Fri – Tue $15
Peak Design Capture Camera Clip v3, Silver - with Standard plate
Delivery between 30 June – 8 July $9.90
Peak Design Capture Black
Peak Design Capture Camera Clip v3, Silver - with Standard plate
Delivery between 25 June – 3 July $15
Peak Design Capture Clip V3 Black with Plate
Delivery between 25 June – 3 July $15
I had been looking for a hands free way to carry my camera when hiking that would allow me fast access to it without having it dangle around my need. The Peak Design Capture Camera Clip looked like an ideal solution. I received it recently and used it extensively on a trip to Acadia National Park last week and have the following feedback.Pros: The unit seems to be well designed/built. It fit easily on my Lowe Flipside 300 camera pack strap. The clip holds the camera securely and removing the camera from the clip is intuitive, fast and easy.Cons: As others have pointed out, the screws that hold the front and back of the clip onto the pack strap will not stay tight. I found I had to tighten them a few turns with every hour or so of use. I am not positive, but I ... MoreI had been looking for a hands free way to carry my camera when hiking that would allow me fast access to it without having it dangle around my need. The Peak Design Capture Camera Clip looked like an ideal solution. I received it recently and used it extensively on a trip to Acadia National Park last week and have the following feedback.Pros: The unit seems to be well designed/built. It fit easily on my Lowe Flipside 300 camera pack strap. The clip holds the camera securely and removing the camera from the clip is intuitive, fast and easy.Cons: As others have pointed out, the screws that hold the front and back of the clip onto the pack strap will not stay tight. I found I had to tighten them a few turns with every hour or so of use. I am not positive, but I think they loosen even when the bag is not in use. This is likely due to the stored spring energy in the compressed pack strap padding. As I am not willing to trust my R5 and lens to just the clip, I always keep the camera strap around my neck when using the clip. For this reason, I would never use the clip on a belt. I plan to clean the screw threads with solvent and then apply Loctite thread lock to see if that stops the screws from loosening. I am not sure if that will work but it cannot hurt. My last 2 issues are minor ones. The camera body attachment is small, to keep the overall size and weight of the clip to a minimum. This plate can be used directly on a tripod head but I am not really comfortable trusting this plate when using a heavy lens (that does not have a tripod mount). For that purpose, I exchange the plate for a larger and beefier plate (don't forget to carry the Allen Key with you). Finally, placing the camera into the clip when using it on a pack strap is a bit challenging. I find I have to pull the strap out from my chest to see the clip to align the camera plate to the clip. It sometimes takes some jiggling to get the two to mate. As I said above, removing the camera is easy. That is more important.So I said a lot in the cons section but overall I am glad I have this unit. Other than a the few small issues outlined, it does the job. I rated the product as 3 stars. One star deducted for the issues described and another deducted for the price, which I think is likely 50-100% higher than it needs to be.
I am a stay at home parent, go hiking 4-6 times a week, and always bring my camera. I was using a PD strap, but with my toddler in the hiking carrier, my neck, shoulders, and back were constantly in pain. I tried cotton carrier, but I prefer it for longer lenses. This clip is perfect. Is it expensive? Sure, but it makes hiking so much easier and more comfortable. I've only been out with it a few times, but my neck and upper back are already feeling much better.I highly recommend this to anyone. Seems simple. Seems expensive. But if you go hiking even once a month, it's worth it imo. Going on a trip and want to have your camera with you everywhere, all day? Get this. It's loads better than a strap for all day wear.
I owned the V2 CapturePRO and used it on my 5DIII, 5DIV and more recently on my R5. I used it on my backpack strap which allowed both of my hands to be free which is great when you are out with the kids. I also loved that the plates were ARCA compatible, so I solely used these plates on my tripods. No additional plates (tripod brand specific, or otherwise) required. The V3 is a great upgrade. The clip is significantly lighter and thinner. = The plate release button on the upper left also functions super smooth without any hesitation. I noticed the V2 would lock up or resist from time to time and required some shaking before the plate (with attached camer) was able to be removed. The plate on the V3 is also a lot smaller compared to the V2 with a much lower profile. ... MoreI owned the V2 CapturePRO and used it on my 5DIII, 5DIV and more recently on my R5. I used it on my backpack strap which allowed both of my hands to be free which is great when you are out with the kids. I also loved that the plates were ARCA compatible, so I solely used these plates on my tripods. No additional plates (tripod brand specific, or otherwise) required. The V3 is a great upgrade. The clip is significantly lighter and thinner. = The plate release button on the upper left also functions super smooth without any hesitation. I noticed the V2 would lock up or resist from time to time and required some shaking before the plate (with attached camer) was able to be removed. The plate on the V3 is also a lot smaller compared to the V2 with a much lower profile. The locking screws seem to screw in easier and I find that the entire process of getting the clip onto my backpack strap is just easier. The screws seems longer, which allows for more room and manuevering around the backpack strap...which may be why it seems easier to get on and off. Both V2 and V3 plates had holes to attach Peak Design anchors to. One thing to mention is that the width of clip on the V3 is a bit narrower as compared to the V2. The V3 is 3 while the V2 is 2.5. So those who intend to attach the clip on straps larger than 2.5 may want to test it out before buying. I was able to get my around my 2.7 backpack strap with a little effort.
I've used the clip a couple times on my backpack strap and it's a breeze to get it into the clip and feel confident that it will stay put. I have not put it to the test of a long day hike so I'm not sure if it would start to aggravate the shoulder from the extra weight of your camera, but I wouldn't be surprised if it did. I appreciate the two separate pairs of pins that are provided if you want to be able to unscrew them with your fingers or to really tighten it up with the other pair of screws and the provided hex key.My only issue with the clip, and it is a small one, is the side that the release button is on. I'm going to assume that the vast majority of people grab their camera with their right hand because that's where the grip for the camera is. Because of ... MoreI've used the clip a couple times on my backpack strap and it's a breeze to get it into the clip and feel confident that it will stay put. I have not put it to the test of a long day hike so I'm not sure if it would start to aggravate the shoulder from the extra weight of your camera, but I wouldn't be surprised if it did. I appreciate the two separate pairs of pins that are provided if you want to be able to unscrew them with your fingers or to really tighten it up with the other pair of screws and the provided hex key.My only issue with the clip, and it is a small one, is the side that the release button is on. I'm going to assume that the vast majority of people grab their camera with their right hand because that's where the grip for the camera is. Because of the release being on the side that it is when you go to grab your camera you have to use your index finger to push the release to get at your camera. This process causes just a mash up of your hands and isn't the most natural feeling, especially if you've got larger hands. It seems like it would have made more sense to have the release on the opposite side so that you could use your thumb to press the mechanism. It would feel much more natural in my opinion. Again, it's a very small issue that isn't actually an issue but if Peak Design reads this maybe they can think about it.
I have been looking for something like this for years. I do a lot of hiking and want to bring my camera along. Carrying your camera around your neck with a 1.5 lb lens for miles is not realistic and if it is in a bag you inevitably miss shots. This puts all the weight on your hip via the belt or onto your bag strap, making it MUCH more comfortable and less unwieldy. It also leaves your camera free to pull out quickly if you find a good shot. It is beautifully machined and seems very strong. I have the pro pad and would definitely recommend picking that up as well it distributes the weight more evenly at your belt if you have a large camera and lens setup and also makes clipping it on and off easier in my opinion. I also have ordered their tripod which uses the same ... MoreI have been looking for something like this for years. I do a lot of hiking and want to bring my camera along. Carrying your camera around your neck with a 1.5 lb lens for miles is not realistic and if it is in a bag you inevitably miss shots. This puts all the weight on your hip via the belt or onto your bag strap, making it MUCH more comfortable and less unwieldy. It also leaves your camera free to pull out quickly if you find a good shot. It is beautifully machined and seems very strong. I have the pro pad and would definitely recommend picking that up as well it distributes the weight more evenly at your belt if you have a large camera and lens setup and also makes clipping it on and off easier in my opinion. I also have ordered their tripod which uses the same mount since the quality and ease of use for this product has impressed me so much. Highly recommended.
I love hiking and taking pictures with my DSLR, but I hate having my camera bumping into my chest as I walk. I also don't like supporting it with my hand so it doesn't bump me. I have a holster-type case on my belt, but I fear one of these days the strap will catch, and I'll drop it off a cliff.That's why I purchased this. I almost always have a backpack on while carrying my camera, so I can attach this to my backpack strap. I tested it on all three of my regular packs from a small day pack to my backpacking pack. It fit all three.I took it to an event recently where I was taking pictures while doing lots of leaning over. I loved that the camera did not bang into my chest. I love that I could twist my body, lean over and walk while the camera remained secure to ... MoreI love hiking and taking pictures with my DSLR, but I hate having my camera bumping into my chest as I walk. I also don't like supporting it with my hand so it doesn't bump me. I have a holster-type case on my belt, but I fear one of these days the strap will catch, and I'll drop it off a cliff.That's why I purchased this. I almost always have a backpack on while carrying my camera, so I can attach this to my backpack strap. I tested it on all three of my regular packs from a small day pack to my backpacking pack. It fit all three.I took it to an event recently where I was taking pictures while doing lots of leaning over. I loved that the camera did not bang into my chest. I love that I could twist my body, lean over and walk while the camera remained secure to my chest, yet conveniently available when I wanted to snap a picture. I love this little device, and I believe it will last many years to come.
So I have NOT tried this in the field yet so take my review with a grain of salt...I just installed this on my Thule camera backpack and walked around the house with it. Repeatedly taking the camera off and back on. From that limited try-out, I found the clip easy to use one-handed despite other reviews to the contrary. The only place where you need to pay attention is when returning the camera to the clip (lining up the camera mount with the clip).One very nice feature is that the clip is also compatible with ARCA holders so can be used directly with an ARCA compatible tripod.I have used neck straps and shoulder bags and swing bags but with hiking/climbing this is always a constant nuisance. Trying the small backpack + clip now so that I always have ready ... MoreSo I have NOT tried this in the field yet so take my review with a grain of salt...I just installed this on my Thule camera backpack and walked around the house with it. Repeatedly taking the camera off and back on. From that limited try-out, I found the clip easy to use one-handed despite other reviews to the contrary. The only place where you need to pay attention is when returning the camera to the clip (lining up the camera mount with the clip).One very nice feature is that the clip is also compatible with ARCA holders so can be used directly with an ARCA compatible tripod.I have used neck straps and shoulder bags and swing bags but with hiking/climbing this is always a constant nuisance. Trying the small backpack + clip now so that I always have ready access to the camera without needing to access the bag, while having two hands free and no gear on a loose strap to fiddle with.As others have said the construction is solid. Machining and finish look high quality. My only complaint is that this item is over-priced for a small clipp - however IF it ends up being my go-to hiking and climbing solution then it is worth it.I will update review when I have some experince in the field...
Attached to my rucksack for hiking and general outdoor wandering, my camera is instantly to hand, very safe and secure, and doesn't dangle and get in the way. I had been looking for something like this for years and I'm yet to find anything else which betters it. It makes such a huge difference to have your camera constantly available while hiking without having to stop and get it out of the bag each time. It is expensive but it is high quality, light and sturdy and comes with a lifetime warranty.It adds some weight to the shoulder, whether this is a problem depends a lot on the weight of your set-up. My Olympus EM1 MK2 with 12-100mm lens plus L-bracket (with PD Clip secured to the base of the L-Bracket) weighs 1.31kg and I've had no problem with day hikes / ... MoreAttached to my rucksack for hiking and general outdoor wandering, my camera is instantly to hand, very safe and secure, and doesn't dangle and get in the way. I had been looking for something like this for years and I'm yet to find anything else which betters it. It makes such a huge difference to have your camera constantly available while hiking without having to stop and get it out of the bag each time. It is expensive but it is high quality, light and sturdy and comes with a lifetime warranty.It adds some weight to the shoulder, whether this is a problem depends a lot on the weight of your set-up. My Olympus EM1 MK2 with 12-100mm lens plus L-bracket (with PD Clip secured to the base of the L-Bracket) weighs 1.31kg and I've had no problem with day hikes / photo-days. But for long distance backpacking I'd certainly consider using a lighter lens. You can always put the camera back in the rucksack for a bit if you need a rest.Unlike a bag it doesn't give any protection against cold and rain. I have no worries here as I fully trust the weather-sealing on my Olympus and I leave it on the clip when the rain starts. But something to bear in mind.Friends who've seen me using the clip have all asked whether it's safe to have your camera hanging off this little clip. But I very quickly realised I could trust this, and I have no worries about it failing as long as it's secured properly, which is straight-forward. If you do have problems getting the camera smoothly into the clip just check if you need a very slight adjustment to the angle at which the clip is fastened to the strap; it should go in very easily.I once tried it on a belt. I didn't like that so much, it pulled a bit too much. I think you need to make sure you have a sturdy belt, and perhaps use lighter gear. Others may disagree with this assessment. I only tried it once because generally I'm using a rucksack.If you're wondering about use with an L-bracket, I have mine attached to the bottom of my Kirk L-bracket. But 3-Legged Thing do a version of universal Ellie L-bracket with a Peak Design Capture Base attached to the bottom of the bracket. I haven't used it myself but would certainly consider it as an option in the future.After 3 years I had a problem with the locking mechanism making it difficult to mount the camera. Peak Design honoured their warranty without a quibble and very efficiently, and provided a free replacement. Really great service. Would this problem stop me buying again. Definitely not. This clip has made a real difference to my ability to enjoy photography outside and be more productive and I wouldn't be without it. Highly recommended.
I bought this clip just before a trip to Iceland to use it for hiking with my Sony A7RIV. It's more convenient than carrying a camera swinging from your neck or stuck in the bottom of your pack, but it was difficult to get the camera in and out - certainly not as easy as it appears in PD´s marketing videos. The thumb screws constantly came loose, no matter how tightly I would tighten them, and within a few days one fell off while I was traveling. Fortunately, this was not while I had nothing attached to the clip, so at least my camera didn't fall out, but still... I had to replace it with a hex bolt from another PD product since I didn't have the hex bolts for this product with me - it never occurred to me that the thumb screws would be so flimsy. Also, the finish ... MoreI bought this clip just before a trip to Iceland to use it for hiking with my Sony A7RIV. It's more convenient than carrying a camera swinging from your neck or stuck in the bottom of your pack, but it was difficult to get the camera in and out - certainly not as easy as it appears in PD´s marketing videos. The thumb screws constantly came loose, no matter how tightly I would tighten them, and within a few days one fell off while I was traveling. Fortunately, this was not while I had nothing attached to the clip, so at least my camera didn't fall out, but still... I had to replace it with a hex bolt from another PD product since I didn't have the hex bolts for this product with me - it never occurred to me that the thumb screws would be so flimsy. Also, the finish began to be scraped off the clip almost immediately: The attached photos are after less than ONE WEEK of use! And as you can see, they scratched the bottom of my nearly new (1 mo). Finally, the clip does not attach very well to my non-PD camera backpack. They claim it's universal, but I'm not sure it works on non-PD products.I filed a warranty claim requesting new thumb screws and hex bolts, but given the cosmetic damage to my camera, I'm not sure I want to keep using this thing, and I'm not sure I would recommend it to others. Not nearly the miracle solution that PD is always trumpting with every product they sell. Too bad: The idea is a great one but the execution leaves a lot to be desired. But the performance definitely does NOT live up to the hype.
Well I now have three of these. Basically I hate camera straps, but it's nice to have a quick access system so I'm not carrying my camera all the time. These are secure enough that when I hear/feel the mechanism go "click" I know the camera isn't going to fall out of it, even without locking it. The release button is just hidden enough so I've never accidentally released it but accessible enough that I can retrieve my camera in about a second. I had bought one for each of my two main camera bags, and use them with the plates on my Fuji cameras when normal lenses attached, or with a plate attached to the tripod foot on my 100-400mm. As long as the sternum strap is cinched tight there's not too much wobble there. This last one I actually bought to attach the Peak ... MoreWell I now have three of these. Basically I hate camera straps, but it's nice to have a quick access system so I'm not carrying my camera all the time. These are secure enough that when I hear/feel the mechanism go "click" I know the camera isn't going to fall out of it, even without locking it. The release button is just hidden enough so I've never accidentally released it but accessible enough that I can retrieve my camera in about a second. I had bought one for each of my two main camera bags, and use them with the plates on my Fuji cameras when normal lenses attached, or with a plate attached to the tripod foot on my 100-400mm. As long as the sternum strap is cinched tight there's not too much wobble there. This last one I actually bought to attach the Peak Design dongles to, and use with a camera strap. That way, when I'm not using one of the before-mentioned bags, I can hang the camera/lens from the strap, but disconnect it rapidly if I want to get close to the ground or something where having it on the strap is annoying. Works! Although I had to fashion a small piece of leather to go between the two plates so the mounting screws wouldn't stick out the back plate (and the dongles would rotate freely). I know this isn't the intended use so not too heartbroken.The only downsides are: 1) There's some (necessary) play in the mechanism so they make a little rattling noise when you're walking around with a camera attached. Not ultimate stealth. I feel like they could put some sort of tensioned rubber bit in it to make it silent, but probably that would make it harder to insert/retrieve; 2) Making the mechanism so small makes it a little fiddly when the whole thing is covered in freezing slush. I know we shouldn't be taking our expensive gear out in those conditions but hey, if foxes are out frolicking then I want to be there; 3) the mounting bolts loosen over time when clamped on a backpack strap. I don't know why it took me so long to realize I could just put a little threadlock on them (the blue kind), which seems to have fixed that gripe.So these are expensive, but one of the better values as far as a gadget that will make your life easier. Unless you like your camera dangling from your neck, hitting people and rocks as you stagger up trails...
| Compatible with | Cameras |
| Length | 5.5 inches |
| Product dimensions | 13.97 x 13.97 x 4.32 cm; 144.58 Grams |
| Is discontinued by manufacturer | No |
| Mounting type | Tripod |
