Last updated at 07/06/2026 20:10:41
Ryobi Rcs1500g 150w 184mm Circular Saw
Delivery $30
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Ryobi 1500w Circular Saw 184mm Corded Power Tool Precision Cutting
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Ryobi 1500w Motor 184mm Circular Saw Diy Adj Cut Depth Power Tool
Delivery $12
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Ryobi Rcs1500g 150w 184mm Circular Saw Bevel Angle Adjustment
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Ryobi 1500w 184mm Corded Circular Saw Rcs1500-g
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Ryobi Rcs1500-G 1500W 184mm Circular Saw Circular Saw
Delivery $26.25
Ryobi 1500W 184mm Corded Circular Saw RCS1500-G
Delivery $10
Ryobi 1500W 184mm Circular Saw
Delivery $9.99
originally posted on bunnings.com.au
I am into my third Ryobi saw they only seem to last about 5 hours total work and then the sawblade bearing fails making strange noises and the blade shakes making it impossible to make an accurate cut. I have only ever used it on pine softwood with a maximum thickness of 30 mm. They are rubbish
originally posted on bunnings.com.au
Larger blade and good power compared to the battery variant. Good value if you need a no fuss circular saw.Don't listen to other commenter about lack blades. I haven't found any issues with sourcing blades. I currently have irwin blade in the saw with no issues.The blade comes with what they call a "brush" which is a metal circle that reduces its fitting to 16mm.
originally posted on bunnings.co.nz
Started good but as I used it more it started to cut on angles. Bolt which holds blade in sometimes comes loose. Pity it does not come with alan key to change blade.Ok for light work only.
| Total Weight | 3.9kg |
| Maximum Cut Depth @ 45 Deg. (mm) | 46 |
| Bevel Capacity (°) | 45 |
| Corded (Yes/No) | Yes |
| Maximum Speed (rpm) | 5500 |
Ryobi Rcs1500g 150w 184mm Circular Saw
Delivery $30
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Ryobi 1500w Circular Saw 184mm Corded Power Tool Precision Cutting
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Ryobi 1500w Motor 184mm Circular Saw Diy Adj Cut Depth Power Tool
Delivery $12
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Ryobi Rcs1500g 150w 184mm Circular Saw Bevel Angle Adjustment
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Ryobi 1500w 184mm Corded Circular Saw Rcs1500-g
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
I am into my third Ryobi saw they only seem to last about 5 hours total work and then the sawblade bearing fails making strange noises and the blade shakes making it impossible to make an accurate cut. I have only ever used it on pine softwood with a maximum thickness of 30 mm. They are rubbish
Larger blade and good power compared to the battery variant. Good value if you need a no fuss circular saw.Don't listen to other commenter about lack blades. I haven't found any issues with sourcing blades. I currently have irwin blade in the saw with no issues.The blade comes with what they call a "brush" which is a metal circle that reduces its fitting to 16mm.
Started good but as I used it more it started to cut on angles. Bolt which holds blade in sometimes comes loose. Pity it does not come with alan key to change blade.Ok for light work only.
Got it for a while. Pretty happy with the product.Being new to woodworking and power tools, i was kinda skeptical because one of the comments said it would be hard to find replacement blade. That was not the case at all, there are 185mm blades everywhere.Only complain is because i dont have a shop vac, the saw dust flies everywhere. I wish there was a dust bag for sale like what Ryobi did for their sanders.
I bought this for renovation work. Ok for general cutting but a bit clunky and not very smooth. After a month of use it started intermittently making a strange noise when powering down. I took it back and swapped for AEG 1200w 184mm which was $20 more. What a difference. A much better sturdier product which just works. Cuts straight and smooth to use. My advice, pay the extra and get the AEG
Powerful, does the job and good value. This saw is a bit rougher (wider cut etc) than my cordless saw - but is a lot more powerful and a bit larger (diameter blade) and doesn't get stuck in tough wood. Happy I've added it to my power tools.
Started to vibrate after cutting only a few benchtops. Same as the 2 star reviews, I will return tomorrow for AEG which is only $20 more. I don't recommend this product due to quality. Happy cutting everyone.
These are a cheap saw, so I wasnt expecting trade quality performance. I bought one for some light work I had to do on a job. The first one I bought was being used to cut 90x45 framing timber. It cut fine for about half an hour but then it started pouring smoke from the motor. I turned it off and it continued to produce a large amount of smoke. Thinking it must have just been a bad one in the batch, I went and bought another. The second one was also a dud. This time I was cutting chipboard and using a straight edge to guide the cut. It was impossible to cut a straight line. When I checked the blade and the cutting deck, I discovered they were not square, and not adjustable! I ended up having to do my cuts freehand. I have bought a lot of tools from bunnings and have ... MoreThese are a cheap saw, so I wasnt expecting trade quality performance. I bought one for some light work I had to do on a job. The first one I bought was being used to cut 90x45 framing timber. It cut fine for about half an hour but then it started pouring smoke from the motor. I turned it off and it continued to produce a large amount of smoke. Thinking it must have just been a bad one in the batch, I went and bought another. The second one was also a dud. This time I was cutting chipboard and using a straight edge to guide the cut. It was impossible to cut a straight line. When I checked the blade and the cutting deck, I discovered they were not square, and not adjustable! I ended up having to do my cuts freehand. I have bought a lot of tools from bunnings and have been pretty happy. These Ryobi saws are unfortunately just junk. I'll stick with the quality brands from now on.
I've had this saw for 1.5 to two years now, Not sure as I can't find the receipt.I purchased a better blade with a higher tooth count from the outset to ensure better, cleaner cutting but right from the start, I found the saw to be lacking any real cutting power or even the ability to make a straight cut, even when compared to the 15 year old GMC that it replaced.Because of this it only came out when I couldn't use either my table or drop saws and always left me completely frustrated while using it.In this past week I have needed to cut a number of sheets of Melamine for new wardrobes but no matter how much effort I put in, I could not stop the saw running off the saw guide rail I set up to make it cut straight. In the end, after much wasted time, I discovered ... MoreI've had this saw for 1.5 to two years now, Not sure as I can't find the receipt.I purchased a better blade with a higher tooth count from the outset to ensure better, cleaner cutting but right from the start, I found the saw to be lacking any real cutting power or even the ability to make a straight cut, even when compared to the 15 year old GMC that it replaced.Because of this it only came out when I couldn't use either my table or drop saws and always left me completely frustrated while using it.In this past week I have needed to cut a number of sheets of Melamine for new wardrobes but no matter how much effort I put in, I could not stop the saw running off the saw guide rail I set up to make it cut straight. In the end, after much wasted time, I discovered that the base plate is warped diagonally and this is causing the saw to both rock and deviate through the cut, resulting in a variation of as much as 5mm from one side to the other on a 445mm cut.Its going back to the store tomorrow, I don't know how I will go without a receipt, but I do know it's a manufacturing problem, either poor design or poor material or both, as it has been like this from new and also as it is under 3 years old, it should still be under warranty, 4 years according to Ryobi web site.As the old saying goes, "you only get what you pay for." Spend a bit more and go with a more reliable brand.
Returning my second one of these. First one burnt out. Second one, the shaft has developed a lot of play. It seems the bearing has gone meaning the blade moves side to side and not cutting straight. The saws haven't outlasted their second blade.
| Total Weight | 3.9kg |
| Maximum Cut Depth @ 45 Deg. (mm) | 46 |
| Bevel Capacity (°) | 45 |
| Corded (Yes/No) | Yes |
| Maximum Speed (rpm) | 5500 |
This rugged yet compact 1500W circular saw can carve through materials with precision and power, making it a great tool for cutting boards, decking, worktops and other sheet materials. This sturdy power tool is designed to be used again and again with its light weight and comfortable grip allowing for total control and extra comfort during long and repetitive cutting jobs. Angled cutting for things like frames and skirting boards is a snap thanks to the saw's 0-45o bevel range.
This rugged yet compact 1500W circular saw can carve through materials with precision and power, making it a great tool for cutting boards, decking, worktops and other sheet materials. This sturdy power tool is designed to be used again and again with its light weight and comfortable grip allowing for total control and extra comfort during long and repetitive cutting jobs. Angled cutting for things like frames and skirting boards is a snap thanks to the saw's 0-45o bevel range.
Ryobi 1500W 184mm Corded Circular Saw
This rugged yet compact 1500W circular saw can carve through materials with precision and power, making it a great tool for cutting boards, decking, worktops and other sheet materials. This sturdy power tool is designed to be used again and again with its light weight and comfortable grip allowing for total control and extra comfort during long and repetitive cutting jobs. Angled cutting for things like frames and skirting boards is a snap thanks to the saw's 0-45o bevel range.
This rugged yet compact 1500W circular saw can carve through materials with precision and power, making it a great tool for cutting boards, decking, worktops and other sheet materials. This sturdy power tool is designed to be used again and again with its light weight and comfortable grip allowing for total control and extra comfort during long and repetitive cutting jobs. Angled cutting for things like frames and skirting boards is a snap thanks to the saw's 0-45o bevel range.
in 8 offers
The lowest price for Ryobi 1500W 184mm Corded Circular Saw right now is $53.70 at eBay.com.au, compared across 4 retailers.
The all-time low was $49.00 on 27 Feb 2026 — today's price is 10% above the lowest ever. That's a little above the best price we've seen.
Prices last updated 7 June 2026.
